Building Filters

Used Sheet Metal Processing in Baden-Württemberg, Germany

Trusted Seller
Auction
STOPA - Automatic Sheet Metal Storage System - 2016
- Manufacturer: Stopa
sheet format: 1525 × 3050 mm, storage height: 3700 mm, number of storage locations: 27 pallets, max. load per pallet: 3000 kg, total storage capacity: 81000 kg (81 t)
Lauda-Königshofen, Germany
Visit Auction Website
Trusted Seller
Sheet metal shelf
- Manufacturer: vib amp kg
Large format 2500 x 1250 mm
Karlsbad, Germany
Sheet metal benders
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany
Trusted Seller
Auction
Eclair Impact Scissors
Eclair Impact Scissors
Stuttgart, Germany
Visit Auction Website
Trusted Seller
2012 SCHECHTL KS 200
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany
Trusted Seller
1980 REIS TUS 60
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany
Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany
Unrolling and splitting systems
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
- Power requirement: 3.2 kW
Accessories tool cabinet with various punches and dies
Bühl, Germany
OBRU WAM
- Manufacturer: OBRU
- Power requirement: 0.18 kW
With drive Manual central spreader Motor has only an on/off switch Brake mecanical Band loop control via dancer roller in start/stop mode The decoiler is running
Sinsheim, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
- Power requirement: 1.7 kW
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
HÄMMERLE - GF BRUGG TRM 50/750
- Manufacturer: HÄMMERLE - GF BRUGG
- Power requirement: 31 kW
Hydraulic straightening machine HÄMMERLE- GF BRUGG TRM 50/750 - with infeed and outfeed table
Sinsheim, Germany
1987 REIS TUS 200 OK 400
- Manufacturer: Reis
- Model: TUS
- Power requirement: 48 kW
Press force: 400 t | Stroke: 2600 mm | Distance between columns: 2000 mm | Side window: 1500 mm | Daylight table - ram (stroke up): 2500 mm | Surface of table: 2500 x 2000 mm | Table height above floor: 1120 mm ...
Eislingen, Germany
1988 REIS TUS 70 OK 70
- Manufacturer: Reis
- Model: TUS-70
Press force: 70 t | Stroke: 900 mm | Distance between columns: 750 mm | Side window: 600 mm | Daylight table - ram (stroke up): 900 mm | Surface of table: 1000 x 700 mm | Table height above floor: 680 mm | Surfa...
Eislingen, Germany
1985 REIS TUS 115 OK 100
- Manufacturer: Reis
- Model: TUS-115
Press force: 100 t | Stroke: 1035 mm | Distance between columns: 1250 mm | Side window: 700 mm | Daylight table - ram (stroke up): 1035 mm | Surface of table: 1280 x 890 mm | Table height above floor: 630 mm | S...
Eislingen, Germany