- Trusted Seller
1986 VEB ELEKTROTECH.GERAETE 4 F - 6150
- Manufacturer: VEB ELEKTROTECH.GERAETE
- Power requirement: 1.5 kW
Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...
Leipzig, Germany - Trusted Seller
EOC nicht bekannt
- Manufacturer: EOC
- Power requirement: 0.55 kW
HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...
Leipzig, Germany - Trusted Seller
1970 straightening machine DDR BETRIEB nicht bekannt
- Manufacturer: DDR BETRIEB
- Power requirement: 1.2 kW
straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.
Leipzig, Germany - Trusted Seller
2001 TRUMPF-PULZER MR65R
- Manufacturer: Trumpf
- Power requirement: 34.4 kW
It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrou...
Leipzig, Germany - Trusted Seller
Bar Stock Shearing Machines PEDDINGHAUS
- Manufacturer: Peddinghaus
Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 2 | Throat: mm | Number of strokes: Hub/min | Height of stroke: mm | Sheet thickness - max.: mm | Round bar ...
Leipzig, Germany - Trusted Seller
1995 Schröder Ducter 1500
- Manufacturer: Schroeder
- Power requirement: 2 kW
CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation...
Leipzig, Germany - Trusted Seller
1993 TRANSFLUID DB618
- Manufacturer: Transfluid
Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single...
Leipzig, Germany - Trusted Seller
1988 WMW -
- Manufacturer: WMW
- Power requirement: 0.25 kW
-application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...
Leipzig, Germany - Trusted Seller
1960 STÖLTING RA
- Manufacturer: STÖLTING
- Power requirement: 4 kW
Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button
Leipzig, Germany - Trusted Seller
1991 MUHR & BENDER (MUBEA) B0 32
- Manufacturer: Mubea
-Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories!
Leipzig, Germany - Trusted Seller
1995 L.A.S.A. RH 16-200
- Manufacturer: L.A.S.A.
- Power requirement: 5.5 kW
description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and g...
Leipzig, Germany - Trusted Seller
1995 SAMCO CTH-201
- Manufacturer: Samco
- Power requirement: 5 kW
Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec...
Leipzig, Germany - Trusted Seller
1991 HEIDEL MB W 140 OP 4
- Manufacturer: HEIDEL
- Power requirement: 25 kW
CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upp...
Leipzig, Germany - Trusted Seller
1982 PEDDINGHAUS Perfefekt 55KA/PA/PLA
- Manufacturer: Peddinghaus
Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. T...
Leipzig, Germany - Trusted Seller
2006 Schilt Engineering BV SBC 60 SP (PLC)
- Manufacturer: Schilt Engineering BV
Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control...
Leipzig, Germany
Tip: Enter manufacturer, model or keyword