Used Sheet Metal Processing in Nevada, USA

RAMS-2007 20ga Stand Alone Power Flanger

• Manufacturer: Rams

Capacity: 20 GA. MAX. – 24 GA. MIN. MILD STEEL | Dimensions: 36" LONG x 17-1/2" WIDE x 34" HIGH | Approx. weight: 204 LBS

MITTLER BROS POWER HAMMER - SINGLE HEAD WITH VARIABLE SPEED MOTOR

CUSTOMER MUST PROVIDE UPPER & LOWER ARM WELDMENTS AND PEDESTAL SPECIFICATIONS 1 Horsepower Motor Approx 900 Blows Per Minute Based on 60 lb.Yoder M2 Hammer Requires around twelve 50 pound bags of sand to fill arms

Tin Knocker Model 1018 Leaf Brake

• Manufacturer: Tin Knocker

New Tin Knocker 10' X 18 Gauge Straight Brake Tin Knocker offer a 10’ sheet metal brakes of 18-gauge capacity. This is an industrial quality brake, the kind you use over a lifetime. Another Tin Knocker example, s...

National 8' Box & Pan Brake, 16 gauge Mdl U9616National 8 foot Box & Pan Brake, 16 gauge

National 8 foot Box & Pan Brake, 16 gauge This National Sheet Metal Machines 96 inch 16 gauge floor model box and pan brake is designed to be easy and simple to operate. Standard with 2, 3, and 4 inch finger widt...

National 6' Box & Pan Brake, 16 gauge Mdl U7216National 6 foot Box & Pan Brake, 16 gauge

National 6 foot Box & Pan Brake, 16 gauge This National Sheet Metal Machines 72 inch 16 gauge floor model box and pan brake is designed to be easy and simple to operate. Standard with 2, 3, and 4 inch finger widt...

Lockformer 10' X 16 Gauge duct notcher

• Manufacturer: Lockformer

Used Lockformer 10' X 16 Gauge duct notcher wired for 208/230 volt 3 phase 7 Day return priv. Buyer pays shipping both ways

Roper Whitney No. 3617 230V Powered Combination Rotary Machine

• Manufacturer: Roper Whitney

A versatile machine designed for deep throat (up to 13″) beading, crimping, and other roll operations up to 18 gauge material. Back-geared, with steel horn, bronze bushed bearing and one-piece frame. Mounted on f...

Moldman Low Pressure Molding Machine Model 2050

Used Moldman Low Pressure Molding Machine This unit comes with the resin feed tubes as well as some molds we have. The molds may or may not be something the buyer can rework for their use. The machine has 29,346 ...

Lown G500 Roll Machine

• Manufacturer: Lown

Used Lown G500 Roll Machine 6" pinch plate roller Lowell brand 500 series 8ft long 208 volt power Weight approximately 3,095 LOWN G-500 Plate Bending and Slip Roll, used, in good working condition. Model G-500 by...

Ellis Screw Type Vise Optional

• Manufacturer: Ellis

New Ellis Screw Type Vise (Optional with models 1800) FREE FREIGHT We will swap out the included cam vise for the Screw vise instead $200.00. Only can order this with the purchase of a Ellis 1800 Saw (Must be don...

HM Machinery TTE 1848 Power Slip Roll (18ga x 48”)

• Manufacturer: HM

The HM Machinery TTE 1848 Power Slip Roll (18ga x 48”) has asymmetric rolls and adjustable roller speed, making pre-bending easy and accurate. The rolls are crowned for the straight rolling pinch. Both the lower ...

Roper Whitney No. 8 Medium Duty Portable Punch

• Manufacturer: Roper Whitney

Roper Whitney No. 8 Medium Duty Portable Punch 5 tons of punching power Two hand linear operation Punch and strip inside a 90 degree arc movement of the handle The Roper Whitney No. 8 Medium Duty Portable Punch i...

Tin Knocker Button Punch Cheek Bender

• Manufacturer: Tin Knocker

New 36" Tin Knocker Button Punch Cheek Bender The Tin Knocker Button Punch Cheek bender is a versatile machine that allows operators to create 3 different types of flanges for use in the fabrication of fittings, ...

Ellis Down Feed Milling Table & Adapter Kit

• Manufacturer: Ellis

Ellis Down Feed Milling Table & Adapter Kit (non-power) 11 inch Crossfeed and 6.5 inch in/out feed Smooth movements Fits Ellis 9400 and 12000 drill presses This Ellis cross feed table fits the 9400 model drill pr...

Wilton 1765 Vise, 6-1/2"Jaw Width, 6" Jaw Opening, 4" Throat Depth 28807

• Manufacturer: Wilton

The Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which p...

Baileigh MSS-16F Sheet Metal Processing

• Manufacturer: Baileigh
• Model: MSS-16F

Good condition Baileigh MSS-16F Sheet Metal Processing. Located in USA and other countries. Click request price for more information.