Machine Tools » Sheet Metal Processing » Switzerland

Building Filters

100

Used processing in Switzerland

  • Trusted Seller
    2003 AMT AHDR 500/1600 Ref

    2003 AMT AHDR 500/1600 Ref No: 43445

    • Manufacturer: AMT
    • Model: AHDR 5001600

    - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2021 SACFORM RMS11-604 Ref No:

    2021 SACFORM RMS11-604 Ref No: 42826

    • Manufacturer: SACFORM

    Object: 42826 | Controls: SCHNEIDER | Sheet width max.: 600 mm | Sheet thickness max.: 4 mm | Feed velocity max.: 32 m/min | Feedstock transport direction: left to right | Sheet width (min): 60 mm | Sheet th...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 KOHLER 50.140/21-3000.1VSRM + HK

    1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

    • Manufacturer: Kohler

    KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2015 HS AUTOMATION MS41OL Ref

    2015 HS AUTOMATION MS41OL Ref No: 45513

    • Manufacturer: HS AUTOMATION

    - Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 43890

    • Manufacturer: Arku

    Coil line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU RM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length s...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1989 ARKU RM 5035.4/21 Ref

    1989 ARKU RM 5035.4/21 Ref No: 42744

    • Manufacturer: Arku

    Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 SMT MV20 BL5022 Ref

    1983 SMT MV20 BL5022 Ref No: 42997

    • Manufacturer: SMT

    Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2004 HAULICK+ROOS RSH 630-1250 Ref

    2004 HAULICK+ROOS RSH 630-1250 Ref No: 55629

    • Manufacturer: Haulick + Roos

    Operating hours: 35,076h Feed: Sankyo v 76 roller feed PC control: 2000/670 Tool protection: Siegfried Advanced System 289 Without soundproof enclosure

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1986 JELSINGRAD / RASTER BPA

    1986 JELSINGRAD / RASTER BPA 75 Ref No: 52656

    • Manufacturer: Raster

    Object: 52656 | Total force (nominal): 75 to | Table surface (left-right): 960 mm | Table surface (front-back): 750 mm | Slide adjustment: 80 mm | Stroke adjustment: yes | Stroke min.: 10 mm | Stroke max.: ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1989 ARISA SC2-160-150-S Ref No:

    1989 ARISA SC2-160-150-S Ref No: 43998

    • Manufacturer: ARISA

    Servo feeder and Siemens control with touch screen, simodrive and simoreg. All documentation, including retrofitting

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 LOIRE SAFE EDIM 650-250

    1995 LOIRE SAFE EDIM 650-250 Ref No: 41753

    • Manufacturer: Loire Safe

    Object: 41753 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Frame design: H-frame, monoblock | Openings in uprights: yes | Number of suspensions: 2 | Table cushion: yes | Total force (nominal): 650 to ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 FEINTOOL GKP 160 Ref

    1983 FEINTOOL GKP 160 Ref No: 46191

    • Manufacturer: FEINTOOL

    The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 FEINTOOL MFA 2500 Ref

    1995 FEINTOOL MFA 2500 Ref No: 46188

    • Manufacturer: FEINTOOL

    Can be inspect in running condition Object: 46188 | Controls: HARDMEIER CONTROL | Drive system: knuckle-joint | Feedstock transport direction: right to left | Total force (nominal): 250 to | Stroke: 67 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1985 PLATARG 712 Ref No:

    1985 PLATARG 712 Ref No: 43759

    • Manufacturer: PLATARG

    Technical details of the machine below: - Stations 12 - Station distance 82.55 mm - max. strip width 90 mm - max. strip thickness 1.63 mm - max. blank diameter 52 mm (standard) 44 mm (zig-zag) - min. blank diamet...

    Niederhelfenschwil, Switzerland
12345

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.