Used cross

Lockformer, Mestek Lockformer Stand-alone 6016 Beader

• Manufacturer: Lockformer

Call for Status and Pricing Beading is a cost-conscious way to stiffen ductwork. It is 5 times faster than cross-braking and uses only one operator. The Lockformer 6016 Beading Roll Former was designed to meet th...

HM MACHINERY HM 2000L

• Manufacturer: HM

The HM Machinery 2000L 6ft x 20 ga Straight Brake is a durable, large-scale manual brake designed to produce consistent high quality bends up to 79" wide in high-production environments. Precision ground tooling ...

2008 Wandres cross brush CF 05/1750/BIP/3/1750 91391

• Manufacturer: Wandres

Control: Wall res | Dedusting brush: Yes | Brushing: Wall res | Number of aggregates: 2 | Kw power motors: 2 X0,5 | Speed-controlled: Yes | Aggregate just installed: Yes | Diffuser width mm: 1.750 | Roll transpo...

HM MACHINERY HM 1300H

• Manufacturer: HM

The HM Machinery 1300H 4ft x 20 ga. Straight Brake (claw foot nose bar) is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine is built for consistently folding thin sh...

HM MACHINERY HM 1300L

• Manufacturer: HM

The HM Machinery 1300L 4ft x 20 ga Straight Brake w/ Angle Nose Bar is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine is built for consistently folding thin sheet ...

HM MACHINERY HM 1300S

• Manufacturer: HM

The HM Machinery 1300S 4ft x 20 ga Box and Pan Brake (claw foot fingers) is a simple and easy to operate segmented brake. The 1300S Box and Pan Brake comes with floor mounting legs as standard, but can also be be...

COMBINED CROSS/LONGITUDINAL CUTTING LINE FOR TAPES 1.500 x 1,5 (2,5) mm product code: 24757

Affrettati! Questo prodotto è già stato visto 4282 volte! Non fartelo scappare! LINEA COMBINATA DI TAGLIO TRASVERSALE/LONGITUDINALE PER NASTRI 1.500 x 1,5 (2,5) mm - Tavola a rulli di introduzione. Centratore.Pin...

H&M 1300H 4ft x 20 ga. Straight Brake (claw foot nose bar)

The HM Machinery 1300H 4ft x 20 ga. Straight Brake (claw foot nose bar) is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine is built for consistently folding thin sh...

H&M 1300S 4ft x 20 ga Box and Pan Brake (claw foot fingers)

The HM Machinery 1300S 4ft x 20 ga Box and Pan Brake (claw foot fingers) is a simple and easy to operate segmented brake. Lightweight, but robustly constructed, this manual machine is built for consistently foldi...

H&M 1300L 4ft x 20 ga Straight Brake with Angle Nose Bar

The HM Machinery 1300L 4ft x 20 ga Straight Brake w/ Angle Nose Bar is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine is built for consistently folding thin sheet ...

H&M 2000L 6ft x 20 ga Straight Brake

The HM Machinery 2000L 6ft x 20 ga Straight Brake is a durable, large-scale manual brake designed to produce consistent high quality bends up to 79″ wide in high-production environments. Precision ground tooling ...

1980 NICHT BEKANNT 23N/8

• Manufacturer: NICHT BEKANNT

Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

H&M HS-3S 4ft x 14 ga Box and Pan Brake w/ Foot Clamp

The HM Machinery HS-3S 4ft x 14 ga Box and Pan Brake w/ Foot Clamp is a large scale brake with angled segmented tooling, designed for the fabrication both straight and box and pan profiles. The HS-3S brake is a d...

UNIVERSAL POWER LINER SIZER DURODYNE USED

• Manufacturer: Duro Dyne

(Specs & Info from DD brochure) 40" Diameter Roll * Insulation from 1/2" to 2" thick is easily accomodated. FEATURES: * Durable 6" rotary blades for cross cut and slitter. * Insulation cradle designed to keep lin...