- Trusted Seller
KD Sheet metal cleaning machine type MARGO RATIO
used
A used KD sheet metal cleaning machine type MARGO RATIO is for sale. The machine is fully functional. For 3-edge sheets 60cm x 80cm
Keltern, Germany 
Sheet metal benders
used
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany- Trusted Seller
Karlsbad, Germany - Trusted Seller
2004 RAS FLEXIbend 73.40
used
- Manufacturer: RAS
- Model: FLEXIbend 73.40
Swivel bending, CNC, J-stop - 5 axes simultaneous RAS CNC control system 6000 for CNC control of upper beam, folding beam, backgauge, folding beam adjustment and lower beam adjustment. Simple input of all necessa...
Metzingen, Germany - Trusted Seller
2012 SCHECHTL KS 200
used
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany - Trusted Seller
1980 REIS TUS 60
used
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany - Trusted Seller
1970 REIS TUS 60 OK
used
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany - Trusted Seller
1983 hydraulic Die-Spotting Press Reis TUS 125 OK-50
used
- Manufacturer: Reis
- Model: TUS-125
pressure 50to, whell away & tiltable table hydraulic ejector, upper plate moveable
Heilbronn, Germany 
Unrolling and splitting systems
used
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany- Trusted Seller
2001 REIS TUS 60 - 40
used
- Manufacturer: Reis
- Model: TUS-60
Control SIEMENS S7-200 Swivel device 180° Centered ejector table Control device for tool cylinder Excellent, almost new condition.
Gammertingen, Germany 
1984 EDEL Stanzprofi 400 #1052-01021
used
- Manufacturer: Edel
- Model: STANZPROFI 400
Accessories tool cabinet with various punches and dies
Bühl, Germany
1994 CAMU SC 615 M
used
- Manufacturer: CAMU
with drive Manual central spreading Brake motor Motor has only one on/off switch The reel runs
Sinsheim, Germany
2025 SCHUBERT WMP 30/600
used
- Manufacturer: Schubert
- Model: WMP 30600
- Maximum vertical roller spacing = 8 mm - Central grease lubrication of the straightening roller bearings - Circulating oil lubrication of the gear unit - Inlet table, outlet rocker - Electric motor-driven rolle...
Sinsheim, Germany
2025 ARKU RM 1825
used
- Manufacturer: Arku
- Model: RM 1825
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
FASTI 506/10/2,5
used
- Manufacturer: Fasti
- Model: 5061025
Control in standard version Operating modes: single stroke - continuous stroke - jogging cutting length 1030 mm sheet thickness 2,5 mm Adjustment range backgauge 530 mm stroke speed 68 rpm Motor power 4 kW Weight...
Langenargen, Germany
Tip: Enter manufacturer, model or keyword