Used Saws

6-1/4″ (158 mm) PROMACUT / TRENNJAEGER #VC-400-HA Circular Cold Saw w/Miter #2675

• Manufacturer: Trennjaeger

2675 TRENNJAEGER VC 400HA GG 154/HE 292 6 Automatic Cutting & Clamping Push Buttons Coolant Pump Good (Saw) 6′ 6″ x 5′ 2″ x 5′ 8″, (Hydraulic Unit) 2′ 6″ x 2′ x 2′ (Saw) 3,000 Lbs., (Hydraulic Unit) 200 Lbs. Univ...

Kalamazoo K16-18 Industrial Cutoff Saw

• Manufacturer: Kalamazoo
• Model: K16-18

Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and som...

35.5" x 20" TANNEWITZ "GH" VERTICAL BAND SAW w/DIRECT DRIVE - TILTING TABLES

35.5" x 20" TANNEWITZ "GH" VERTICAL BAND SAW Imperial Metric Serial No 72091, Model GH, EQUIPPED WITH: Direct Motor Drive Tilting Main Table & Auxiliary Table CATALOG SPECIFICATIONS: Work Capacity, Nominal 35.5" ...

9" x 18" WELLS (WF) "W-9" HORIZONTAL BAND SAW w/HYDRAULIC UP/DOWN BAND FEED - VISE

9" x 18" WELLS (WF) AUTOMATIC HORIZONTAL BAND SAW Imperial Metric Serial No 803490, Model W9 EQUIPPED WITH: Manual Rotating Clamping Vise Hydraulic Band Saw Up-Feed and Down-Feed Coolant Tank CATALOG SPECIFICATIO...

(Inv.52108) 2002 Dyna CS80 Chop Saw

Model: CS80 Serial: 7802 Year: 2002

35.5" x 20" TANNEWITZ "GH" VERTICAL BAND SAW w/DIRECT DRIVE - TILTING TABLES - 5 HP MOTOR

35.5" x 20" TANNEWITZ "GH" VERTICAL BAND SAW Imperial Metric Serial No 8718, Model GH, EQUIPPED WITH: Direct Motor Drive Tilting Main Table & Auxiliary Table CATALOG SPECIFICATIONS: Work Capacity, Nominal 35.5" x...

18" x 20" MARVEL "81A" TILTING-HEAD AUTOMATIC VERTICAL BAND SAW w/72" AUTOMATIC MULTI-CYCLE SHUTTLE FEED

• Manufacturer: Marvel
• Model: 81A

81A MARVEL TILTING HEAD AUTOMATIC Imperial Metric UNIVERSAL VERTICAL BAND SAW Serial No. D1385, Model 81A EQUIPPED WITH: 72" Automatic Shuttle Feed Loading Table w/Multi-Cycle & Pre-Set Counter Hydraulically Oper...

9.5" x 10.5" SUMMIT "250MP" HYDRAULIC HORIZONTAL BAND SAW w/ADJUSTABLE CUTTING PRESSURE - VISE

• Manufacturer: Summit

250MP SUMMIT HYDRAULIC HORIZONTAL BAND SAW Imperial Metric Model 250MP EQUIPPED WITH: Hydraulic Regulated Downfeed Adjustable Cutting Pressure Vise CATALOG SPECIFICATIONS: Maximum Capacity, Round Stock 10-1/2" Ma...

41.5" x 21" TANNEWITZ "RH" VERTICAL BAND SAW w/DIRECT DRIVE - TILT TABLE - 7.5 HP MOTOR

41.5" x 21" TANNEWITZ "RH" VERTICAL BAND SAW Imperial Metric Serial No 14947, Model RH, EQUIPPED WITH: Direct Motor Drive Tilting Main Table & Auxiliary Table CATALOG SPECIFICATIONS: Work Capacity, Nominal 41.5" ...

LOCKFORMER 24S VERT SAW

• Manufacturer: Lockformer

LOCKFORMER BRETT MAR MODEL #24S VERTICAL SAW 110 VOLT 40 1/2 X 46" TABLE 24" THROAT 8" UNDER BLADE GUIDE

32" x 23" AMADA "HK-800" SEMI-AUTOMATIC MITERING HORIZONTAL BAND SAW - POWER MITERING BASE - 7.5 HP BLADE MOTOR

• Manufacturer: Amada
• Model: HK-800

32" X 23" AMADA "HK-800" SEMI-AUTOMATIC Imperial Metric DUAL-COLUMN MITERING HORIZONTAL BAND SAW Serial No 80010001, Model HK-800 EQUIPPED WITH: Powered Mitering Base - Double Column Horizontal Head Hydraulically...

1997 16" x 16" AMADA "HA-400W" AUTOMATIC HORIZONTAL BAND SAW w/MULTI-INDEX STOCK FEEDING TABLE

• Manufacturer: Amada
• Model: HA-400W

16" x 16" AMADA AUTOMATIC HORIZONTAL BAND SAW Imperial Metric New 1997, Serial No 45650046, Model HA-400W EQUIPPED WITH: Hydraulic-Driven Stock-Feed Table ((9) Times Feed) Hydraulic Band Saw Up-Feed and Down-Feed...

DAKE MEP Tiger 350AX Automatic Vertical Cold Saw Circular Cut-Off Saw Coldsaw Z24052B

• Manufacturer: Dake

DAKE MEP Tiger 350 AX Miter Automatic Cold Saw Model: Tiger 350AX Serial #: 006039 TTR Maximum Blade Size: 13-3/4″ Capacity @ 90° Round: 4-1/2″ Capacity @ 90° Square: 3-3/4″ Vise Opening: 7-1/2″ Blade Speeds: 15/...