Used machine tools in Canada

Trusted Seller
1997 Okuma LC40-2SC CNC Lathe
- used
- Manufacturer: Okuma
- Model: LC40-2SC
1997 Okuma LC40-2SC CNC Lathe Okuma CNC Control Console. 415V, 3PH, 70KVA, 50HZ, Full Load 109A, Largest Motor 190A, Interrupting Capacity 10KA. M Maximum Swing Over Bed: 23.62”, Maximum Turning Diameter: 21....
Toronto, Canada
Trusted Seller
2001 DYNAMIC COMPACT GT27 CNC LATHE WITH FAGOR CNC CONTROLS
- used
- Manufacturer: Dynamic
2001 DYNAMIC COMPACT GT27 LATHE WITH FAGOR CNC CONTROLS MANUFACTURER: DYNAMIC MODEL: COMPACT GT27 S/N: 000603 MFG DATE: 2001 SUPPLY VOLTAGE: 240V 60HZ 3PH LARGEST MOTOR: 13.6A FULL LOAD CURRENT: 17A SCCR:...
Hamilton, Canada
Trusted Seller
16 x 54 in. Monarch Lathe, DRO, Chucks, more
- used
- Manufacturer: Monarch
- Model: 16
"Great condition, well maintained by experienced operators, normal wear from use!" 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more. EQUIPPED: * Digital Read Out 2 axis * Taper turning attachment * 3 Jaw ...
$4,750 USD
Montreal, Canada
Trusted Seller
East Lion CNC Mill
- used
- Manufacturer: East Lion
Capacity: 14" x 59" Table
Vaudreuil-Dorion, Canada
OB7-Stretch - Collaborative 7-Axis Robot CNC mill Package
- new
Standard Features Rolling Robot Stand Robot Work/Assembly Table PG2 Parallel Gripper Electronic Robot Interface includes (8) inputs/outputs controller, regulator, and (2) valves 4” Pneumatic Soft Jaw Air Vise Cle...
Flesherton, Canada
Trusted Seller
2011 TSUGAMI SS26
- used
- Manufacturer: Tsugami
- Model: SS26
2011 Tsugami SS26 Opposed Gang Tool CNC Lathe, 6-Axis, Sub-Spindle, 5000 RPM Tool Spindle, Rhinobar Bar Feeder *Machined 95% Aluminum
Burlington, Canada
Trusted Seller
Leadwell LTC-25iS
- new
- Manufacturer: Leadwell
- Model: LTC25
SPECIFICATIONS swing over bed: 610mm (24”) maximum turning diameter: 610mm (24”) maximum turning length: 770mm (30.3”) X-axis travel: 215 + 10mm (8.46” + 0.4”) Z1-axis travel: 800mm (31.5”) Z2-axis travel: ...
Toronto, Canada
Trusted Seller
Maxcut MTC25-0920M turning centre
- new
- Manufacturer: Maxcut
Maxcut MTC25-1420 Turning Centre Specifications: swing over bed: 508mm (20”) swing over cross slide: 230mm (9.05”) maximum turning diameter with turret: 305mm (12”) maximum turning length with chuck: 508mm (2...
Toronto, Canada
Trusted Seller
Leadwell T-6SMY Turning Centre
- new
- Manufacturer: Leadwell
- Model: T6SMY
Leadwell T-6SMY Turning Centre Specifications: maximum swing: 450mm (17.7”) maximum turning diameter: 410mm (16.1”) maximum turning length: 458mm (18”) X-axis (box ways): 190 + 15mm (7.48” + 0.59”) Y-axis (b...
Toronto, Canada
Trusted Seller
Leadwell TM-1500
- new
- Manufacturer: Leadwell
SPECIFICATIONS maximum swing: 790mm (31.1”) maximum turning diameter: 780mm (30.7”) maximum turning length: 1500mm (59”) bar capacity: 177.8mm (7”) X-axis travel:730 + 40mm (28.7” + 1.57”) Y-axis travel: ±2...
Toronto, Canada
Trusted Seller
2006 HYUNDAI KIA KIT450 CNC TURNING CENTER WITH FANUC SERIES 0I-TC CONTROL
- used
- Manufacturer: Hyundai
- Model: KIT450
2006 HYUNDAI KIA KIT450 CNC TURNING CENTER WITH FANUC SERIES 0I-TC CONTROL & CHIP CONVEYOR MANUFACTURER: HYUNDAI KIA MACHINE MODEL: KIT450 S/N: KIT4503020 YEAR: 2006 OPERATING TIME: 15304 CUTTING TIME: 5254...
Toronto, Canada
Trusted Seller
2006 HYUNDAI KIA KIT450 CNC TURNING CENTER WITH FANUC SERIES 0I-TC CONTROL
- used
- Manufacturer: Hyundai
- Model: KIT450
2006 HYUNDAI KIA KIT450 CNC TURNING CENTER WITH FANUC SERIES 0I-TC CONTROL MANUFACTURER: HYUNDAI KIA MACHINE MODEL: KIT450 S/N: KIT4502770 YEAR: 2006 OPERATING TIME: 28321 CUTTING TIME: 18666 POWER: 200/22...
Toronto, Canada
CNC Hybrid Lathe Milltronics ML-18 2008
- used
- Manufacturer: Milltronics
- Model: ML18
Main features Year: 2008 Control: Milltronics Centurion 7 Turning capacity : Max. diameter over bed: 19 inches Max. diameter over cross slide: 9.25 inches Distance between centers: 40 inches Chuck: 10 inches X/Z ...
$25,000 USD
Get financing
Est. $471/mo
Rivière-du-Loup, Canada
Trusted Seller
2017 STAR SR-32J TYPE N
- used
- Manufacturer: Star
- Model: SR-32J
2017 Star SR-32J Type N Swiss-Type Automatic CNC Lathe, Live Tooling, Y-Axis, C-Axis, TF32 Collet Chucks, Bar Feeder, Workpiece Unload Conveyor, High-Pressure Coolant, Chip Conveyor
Burlington, Canada
Trusted Seller
2016 OKUMA MULTUS U3000
- used
- Manufacturer: Okuma
- Model: Multus U3000
2016 Okuma Multus U3000 Multi-Tasking CNC Machining Center, 5-Axis, Sub-Spindle, B-Axis Indexing, OGL 30 Gantry System, High-Pressure Coolant, Capto C6 Tooling System, Chip Conveyor
Burlington, Canada