- Trusted Seller
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine
used
- Manufacturer: Demag
- Model: Ergotech
was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and ...
- Trusted Seller
DEMAG ERGOTECH VIVA 800-400 injection moulding machine
used
- Manufacturer: Demag
- Model: Ergotech
was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colo...
- Trusted Seller
ENGEL ES 1350/350 HL injection moulding machine
used
- Manufacturer: Engel
- Model: ES 1350
was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameter...
- Trusted Seller
KRAUSS MAFFEI KM 300-1900 C1 injection moulding machine
used
- Manufacturer: Krauss-Maffei
was built in 2007 in Germany by KraussMaffei Group GmbH. The machine, which is distinguished by its reliability and high performance, is used for the mass production of plastic parts of various colours, shapes an...
- Trusted SellerAuction
2011 KRAUSS MAFFEI 420-3000 CX injection molding machine
used
- Manufacturer: Krauss-Maffei
We offer a Krauss-Maffei 420-3000 CH injection molding machine, manufactured in 2011 by Krauss-Maffei Kunstofftechnik, with a specially hardened 80 mm diameter screw. The machine includes: - a WITMANN DFR-10 work...
Słomczyn, PolandVisit Auction Website - Trusted SellerAuction
2022 TOYO SI 350-6S JH 750 E electric injection molding machine
used
- Manufacturer: Toyo
Si-350-6S/JH750E (L/D 24) electric injection molding machine, PACK version, manufactured by TOYO Machinery & Metal CO. LTD., Japan. The PACK series is designed specifically for packaging production. Basic specif...
Słomczyn, PolandVisit Auction Website - Trusted Seller
BATTENFELD BA 600 CDC
used
- Manufacturer: Battenfeld
- Model: BA 600 CDC
The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...
- Trusted Seller
VICTOR MSZ 30
used
- Manufacturer: Victor
was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...
- Trusted Seller
WELLTEC TTI 450 FH
used
- Manufacturer: Welltec
- Model: TTI-450
built in 2008 in Hong Kong, is distinguished by its high clamping force of up to 450 tonnes and efficient high-end components. The machine designed for plastic processing uses the injection moulding method, which...
- Trusted Seller
PONAR ŻYWIEC UT 090 H
used
- Manufacturer: PONAR ŻYWIEC
was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the in...
- Trusted Seller
ENGEL INSERT 200H/50
used
- Manufacturer: Engel
- Model: Insert
was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Than...
- Trusted Seller
BATTENFELD TM 1300
used
- Manufacturer: Battenfeld
was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...
$4,109 USDJelenia Góra, Poland - Trusted Seller
ELWIK RT-C
used
- Manufacturer: Elwik
is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The ...
$1,094 USDJelenia Góra, Poland - Trusted Seller
TECHNO ZK
used
- Manufacturer: TECHNO
, built in Poland by TECHNO-Wrocław, is used for economical packaging of products in a very short time. We have two units of such machines for sale, the price shown in the advertisement is for one unit.
$508 USDJelenia Góra, Poland - Trusted Seller
ZERMA GSE 700
used
- Manufacturer: Zerma
manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rot...
Arburg Allrounder 570 Injection Molding
used
- Manufacturer: Arburg
- Model: Allrounder 570
Good condition Arburg Allrounder 570 Injection Moldings manufactured in 2007. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
