Used Processing in Île-de-France, France

Modulo+

• Manufacturer: Babcock Wanson

Modulo+ Gas Burners Fuel available: Natural gas, Liquefied gas From 6 to 20 MW Turn down ratio 1 to 12. Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676). Minimum excess air over the entire opera...

LNTA & TA

• Manufacturer: Babcock Wanson

LNTA & TA Industrial Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request. LNTA: From 3.5 to 10.5 MW. TA: from 9 to 22 MW. LNTA: Fully integra...

Air Preheating R-Eco

• Manufacturer: Babcock Wanson

Principle of operation: Exhaust Gas Combustion Air Preheating Economiser The benefits of "R-ECO" installation are most apparent where there is greater than 90% condensate return. As returning condensate is alread...

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...

TPC-B Series

Simple Reliable Operation TPC-B includes an integral, air-cooled outer case that acts as both a combustion air pre-heater/economiser and as a constant barrier between the hot combustion gases and the outer struct...

F-DGSi NDC CO2 Free Air Dryer

• Manufacturer: F-DGSi

CO2 Free Air Dryer Reference | NDC.[Flow rate] Air dryers FT-IR, GC-ATD, GC-FID, Laser, Purge microscope, TOC The NDC CO2-free air dryer purifies your compressed air network to provide a continuous supply of clea...

F-DGSi COSMOS AIR COMPRESSOR

• Manufacturer: F-DGSi
• Noise level: 50 dB

Air Supply for COSMOS Gas Generator Reference | COSMOS.AIR.COMPRESSOR Compressors The COSMOS Air Compressor produces continuous, high quality oil-free, pre-dried air. The COSMOS Air Compressor is the ideal soluti...

2007 DEMAG 420 T- 810 CONCEPT / 1450

• Manufacturer: Demag

Type of control: NC 4 | Number of hours: 38 000 H | Storage place: LA FRANCE | Deadline: DISPO | Closing force: 420 T | Opening stroke: 710 mm | Columnar: 800 x 710 mm | Plateaux dimensions: 1200 x 1100 mm | Min...

2008 BILLION 200 T BI-MATERIAL H780/H260

• Manufacturer: Billion

12 HOT RUNNERS, Type of control: DIXIT II | Number of hours: 25 550 H | Storage place: MECA PLASTIC | Deadline: AVAILABLE | Closing force: 200 T | Opening stroke: 560 mm | Columnar: 610 x 610 mm | Plateaux dimens...

2006 DEMAG 300T -720 EL EXIS S - 1450 ELECTRIC

• Manufacturer: Demag

2 BLOWERS, accus 2 on the injection Type of control: NC4 | Number of hours: 39 500 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 300 T | Opening stroke: 67 mm | Columnar: 630 x 630 mm | Plate...

2007 ENGEL 50T-200 VICTORY

• Manufacturer: Engel
• Model: Victory

Type of control: CC 200 | Number of hours: 39 600 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 50 T | Opening stroke: 400mm | Columnar: 500 mm x 450 mm | Plateaux dimensions: 500 mm x 450 m...

2001 ENGEL 110T-500

• Manufacturer: Engel

Type of control: CC100 | Number of hours: 56 660 | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 110 T | Opening stroke: 500 mm | Columnar: 790 mm x 680 mm | Plateaux dimensions: 790 mm x 680 mm...

2012 ENGEL VICTORY ECODRIVE 160T BI MAT

• Manufacturer: Engel
• Model: Victory

8 sequential, hot runners 12/1 24 zones, viper robot, carpet