Used Sollich Processing in Germany

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Water recooler SOLLICH - Type FKL-S-36, year of manufacture 1993.

• Manufacturer: Sollich

Pre-cooling channel SOLLICH - Type KK-280 with approx. 8.7 meters length.

• Manufacturer: Sollich

wire belt table SOLLICH - type TRT-280, with approx. 280 mm working width.

• Manufacturer: Sollich

90° curve table SOLLICH - Type GT-420-90°R with approx. 420 mm working width.

• Manufacturer: Sollich

Belt infeed table SOLLICH - Type 2.2 m transport table 520, built in 2017.

• Manufacturer: Sollich

The table was used as an infeed table on a TC-420 enrobing machine. However, the belt table has a working width of approx. 520 mm and a length of 2.2 meters.

Second-hand pralines take-off device - SOLLICH type Chocopack CP-820, year 1983/3.

• Manufacturer: Sollich

The machine is suitable for the automatic transfer of pralines or bars to the plastic plates. Four vertically arranged feed belts group the pralines into a tight product rope in a careful way. The drive of all fo...

extruder molding line HOPPE/SOLLICH - Type KBF-KK-GS with approx. 280 mm working width:

• Manufacturer: Sollich

The system for producing product strands that can be cut to length using a guillotine. G13085 used extruder Hoppe type KBF-280 with feed hopper, feed rollers and mouthpiece, for forming 5 mass strands. These are ...

Used. Groove kernel cutting machine PEHA - Type H1-04-03-600 with approx. 600 mm working widt

• Manufacturer: PEHA

The nuts are fed through the feed hopper into the slicing system by a continuously adjustable vibrator with feed channels. In the slicing system, the product is sliced into cubes using three disc knife shafts. Ou...

cooling tunnel SOLLICH - type MK-320, YOM: 1989

• Manufacturer: Sollich

Inlet table missing 3 x 2 metre sections, painted 1 x 2 metre section with cooling channel lower part Outfeed table missing

Cooling duct SOLLICH - Type -820 with a length of approx. 15 meters.

• Manufacturer: Sollich

Segments cooling channel SOLLICH - Type MK-450.

• Manufacturer: Sollich

2 x 2-mtr. section, 4 x 1-mtr. hoods, drive bracket.

Cutting machine PAVONI ITALIA - with three cutting frames

• Manufacturer: Pavoni Italia