Used Processing in Wallonia, Belgium

Trusted Seller
2007 Sand feeder 31 liters, KLEIN
- used
External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...
Amel, Belgium
Trusted Seller
1992 Treatment ladle with teapotspout ACETARC, 750 kg
- used
External dimensions: length 1400 mm, width 900 mm, height 2050 mm With new lining With gearbox N°2
Amel, Belgium
Trusted Seller
Precisions scale pocket model, max 20 gr
- used
- Manufacturer: Voltcraft
With manual instructions and calibration weight Minimum 0,02 gr Maximum 20 gr
Amel, Belgium
Trusted Seller
Grinding table 2000 mm x 1030 mm x 880 mm
- used
External dimensions: length 2100 mm, width 1180 mm, height 2100 mm Inner dimensions: length 2000 mm, width 1030 mm, height 880 mm Pipe section Ø 225 mm With lightening connection
Amel, Belgium
Trusted Seller
Teapotspout treatmantladle SENSENBRENNER, ± 3,5 t
- used
- Manufacturer: Senssenbrenner
With planetary gearbox With teapot spout With forklift feets (receiving pockets) With new lining Ø inside top 790 mm, inner height 1050 mm
Amel, Belgium
Trusted Seller
Cooling generator AXIMA
- used
Type: FKSL 15 Serial number: 49.0024599 Construction year: 2005 Weight: 610 kg Dimensions: length 2250 mm, width 950 mm, height 2200 mm Engine: 25 kW, 400 V, 50 Hz Cold water inlet: 21° C Cold water outlet: 15° C...
Amel, Belgium
Trusted Seller
Small permanent drum magnet with drive
- used
- Manufacturer: BMD
External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating
Amel, Belgium
Trusted Seller
Small permanent drum magnet with drive
- used
- Manufacturer: BMD
External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating
Amel, Belgium
Trusted Seller
Thickness gauge ELCOMETER
- used
- Manufacturer: ELCOMETER 211
measuring range 1 - 1000 μm with pocket Weight: ± 1kg | Dimensions: length 210 mm, width 60 mm, height 30 mm
Amel, Belgium
Trusted Seller
Furan sand screw mixer BORDEN, ± 5-10 t
- used
External dimensions: length 3400 mm, width 1250 mm, height 2200mm Between axe input and exit 1700 mm Ø of the tube 240 mm Comannd over automat TELEMECHANIK TSX2720 With pneumatic slide With sensor on the cover
Amel, Belgium
Trusted Seller
2008 2 x Casting ladle 8 t FOUNDRY SERVICE
- used
Serial number 6067/10 + 6067/11Construction year: 2008Weight: ± 2,800 kgupper Vessel Ø 1630 mmbelow Vessel Ø 1530 mmVessel height 1340 mmTotal height 2390 mmTotal width 1834 mmWith planet gearbox RSD110VWith ladl...
Amel, Belgium
Trusted Seller
Small sandhopper, ± 1 m³
- used
On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm
Amel, Belgium
Trusted Seller
Refrigerating air dryer Beko
- used
- Manufacturer: Beko
- Model: RA
Motor 230 V mono Air entry 1" Suitable for compressor ± 22 kW
Amel, Belgium
Trusted Seller
Mobile motorized turntable, Ø ± 1500 mm, ± 10 t
- used
Outside height 520 mm, Ø 1500 mm Working disc Ø 1500 mm, out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually
Amel, Belgium
Trusted Seller
Mobile motorized turntable, Ø ± 1500 mm, ± 10 t
- used
Motor DEMAG, type KBF71B8/2, 430 rpm outlet, 380 V Working disc Ø 1500 mm, made out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually
Amel, Belgium