Used Processing in Wallonia, Belgium

Trusted Seller
Shake-out grid 3100 x 1700 mm
- used
Motor ACEC 15 hp, 1440 rpm, 220/380 V With reception bunker and vibrating chut for sand
Amel, Belgium
Trusted Seller
1982 Shake-out conveyor BMD 4500mm x 1000mm
- used
2 vibratingmotors Weight: 3500 kg
Amel, Belgium
Trusted Seller
Preparation central for amin gaz MICHEL
- used
Type: ZAV-100P-80, serial number: 87/36 Year of construction:1987, weight: 1000 kg As good as new
Amel, Belgium
Trusted Seller
Hydraulic moulding machine RITTERHAUS, table 700 mm x 1100 mm
- used
Type: F3, 1964, Serial number: 2225-7External dimensions: 1100 mm x 1700 mm, h. (above ground) 1900 mm220/380 V table dimensions 1100 x 700 mm.Maximum width of frame: 850 mm, clamping pressure: 16,000 kgShaker lo...
Amel, Belgium
Trusted Seller
Screw furan sand mixer AXMANN
- used
- Manufacturer: Axmann
Type: GM 2-5, serial number: 5569 Year of construction: 2001, weight: ± 500 kg Useful length 1800mm Inlet sand 80x80mm, outlet Ø 120mm Screw Ø 200mm Special execution for Pep-Set Capacity 2 until 5 t/h (modificat...
Amel, Belgium
Trusted Seller
Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.
- used
Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter
Amel, Belgium
Trusted Seller
1966 Rotary table shot blast plant SISSON-LEHMANN, Ø table 2300 mm, 1200 kg
- used
2 turbines, (1 right, 1 left), Type 6/59 The necessary filter is 5000 bis 6000 m³/h
Amel, Belgium
Trusted Seller
Shake-out grid 3000 x 1850 mm
- used
On 20 springs, with vibrating axle, drive over 2 belts, with motor
Amel, Belgium
Trusted Seller
Moulding machine BMM, type QJS217PL
- used
- Manufacturer: BM&M
Jolt-squeeze machine max pressure 9260 kg. jolt capacity 680 kg. pattren draw 178 mm. for moulding boxes max. 800x800 mm.
Amel, Belgium
Trusted Seller
Shake-out grid 4000 mm x 2000 mm ( twin)
- used
- Manufacturer: Bedford
2 x motor WEG, 11 kW, 380/660 V, 1460 rpm With unbalanced axle, motor with belt drive Underframe with springs (16 pcs.), for twin grate
Amel, Belgium
Trusted Seller
Gravity die casting machine FRIES, hydraulic, 440 mm x 440 mm, tiltable
- used
Serial number: 598010, year of construction: 1963 1,5 kW, 220/380 V, 1480 rpm Stoke way: ± 200 mm, tiltable, with hydraulic unit core moving
Amel, Belgium
Trusted Seller
Green sand mixer with wheels AXMANN 10 m³/h
- used
- Manufacturer: Axmann
Motor 15 kw Outside dimensions: 1800mm x 1900mm | Useful dimensions: Ø 1800mm, h. 1150mm
Amel, Belgium
Trusted Seller
1989 Core sand mixer, 135 l = 200 kg, BADIE KSU 200
- used
Brand: MIXTENSIF, type: KSU 200 Motor MERGER, type: MM 132 M4, 7,5 kW, 10 hp, 220/380 V, 20/ 144 A With 2 pneumatic discharge flaps, with cover
Amel, Belgium
Trusted Seller
Pneumatic sand conveyor BONIFACE 125 l
- used
Type: TP125, Serial number: 12560 With 2 sand inlets Ø 160mm, with 2 pneumatic flaps Sand exit Ø 70mm, sand inlets height ± 1600mm Manometer on pressure, a sensor high level, with compressed air regulator and dry...
Amel, Belgium
Trusted Seller
Double floor type grinder DÜRRSCHMIDT, Ø 760 x 80mm
- used
Type: VITEX, weight: ± 2300 kg Motor S.W., type: M00D33SP, serial number: 265977, 19 kW, 27 hp, 1440 rpm, 220/380 V Driving by cone pulley, 3 speeds Shelf 360 x 150mm Continuous speed 60 m/s Aspiration from the b...
Amel, Belgium