Used Extruders in Illinois, USA

WELEX 6″ EXTRUDER SCREW 12351

• Manufacturer: Welex

Welex 6″ extruder screw, S/N 24-0138, 38:1 L/D, 2 stage, 252.5″ overall length. Keyway is 9″ long x 1.5″ wide.

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

4.5″ TWO STAGE EXTRUDER SCREW 12023

Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

BRABENDER 25mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

Brabender model 088 twin screw extruder, air cooled. Includes DC motor and temperature control panel.

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

• Manufacturer: Leistritz

Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

BELLAFORM BH25-25D 25mm EXTRUDER 14768

Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...