PAIR MEYER 5.5″ ID AIRLOCKS 18432
used
- Manufacturer: Meyer
Pair of incomplete William J. Meyer HDX series 5.5″ airlocks. S/N 291105-010B and 292545-010A. Both have 11″ OD bolt flange mount with 5.5″ OD airlock inlet and outlet. Cast iron airlock housing with replaceable ...
Elk Grove Village, IL
CDS CBH36-6 6″ X 36″ 18259
used
- Manufacturer: CDS
CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are ...
Elk Grove Village, IL
LORENZ 6″ OD DIVERTER 18210
used
- Manufacturer: Lorenz
Lorenz model DV2-600-11AL-ST-C 6″ OD diverter. S/N 35588-01. Has 6″ OK160 pipe adapters that can be removed to go back to 6″ OD flange less pipe. Aluminum construction
Elk Grove Village, IL
COPERION SMALL MATERIAL HOPPER 16768
used
- Manufacturer: Coperion Waeschle
Coperion Capital small material hopper CS series 36″ diameter barrel, 10″ straight side, 25″ long, 60-degree cone with 10″ top opening, 7-3/4″ ID outlet with 10.5″ OD bolt flange, Unit has four (4) stand mounts a...
Elk Grove Village, IL
LARGE FOREMOST VACUUM RECEIVER 18220
used
One (1) used Foremost vacuum receiver. With lid and flapper. Aluminum construction. 2.5″ OD inlet. 6.5 OD outlet
Elk Grove Village, IL
BERINGER 2 HP HYDRAULIC POWER 16824
used
- Manufacturer: Beringer
Beringer model HPNVL 2HP hydraulic power pack, S/N 4SL704-3. 2HP 230/460V motor with pump which are not mounted to the tank. Includes controls.
Elk Grove Village, IL
GAMMA FLUX 9 ZONE TEMPERATURE 16294
used
- Manufacturer: Gammaflux
Gamma Flux 9 zone hot runner controller, 240-Volts.
Elk Grove Village, IL
SPROUT WALDRON 1410-MST 10″ AIRLOCK 14267
used
- Manufacturer: Sprout Waldron
Sprout Waldron model 1410-MST airlock, S/N 82-0005, steel vanes with replaceable tips, 13″ x 13″ OD flange, 10″ x 10″ OD opening, no gearbox nor motor
Elk Grove Village, IL
AMBRITT 6″ DIAMETER X 50″ 14273
used
Ambritt feed rolls, no S/N. 6″ diameter x 50″ long steel, knurled rolls in off-set position. Pneumatic pinch. 25:1 Sumitomo gearbox with a 1.0 service factor. New 3 or 5HP motor included.
Elk Grove Village, IL
4″ DIAMETER X 24″ WIDE 12078
used
- Manufacturer: blades machinery
Knurled steel feed rolls, 4″ diameter x 24″ wide. Air operated feed roll. Pinch rolls are driven by a 2HP 180V 1,750 RPM DC motor through a 5.3:1 gearbox.
Elk Grove Village, IL
5″ X 12″ KNURLED STEEL 10107
used
Knurled steel feed rolls 5″ x 12″. Powered by a 1HP 230/460V AC motor into an Acrison, 60:1 gearbox. Upper roll is spring tensioned.
Elk Grove Village, IL
DUAL IN-FEED CUMBERLAND 2062B HOPPER 10200
used
- Manufacturer: Cumberland
Cumberland dual in-feed 2062B hopper with rear mounted 48″ wide paddle feed. Paddles powered by a 3HP DC 180-Volt motor through Boston gear F231D-24-B9 24:1 gearbox, chain and sprocket driven paddles.Two are avai...
Elk Grove Village, IL
18″ WIDE FEED ROLLS 5851
used
18″ wide feed rolls. Both rolls are 6″ diameter x 18″ wide. One (1) rubber and one (1) made of knurled steel. Pneumatically actuated by two pneumatic cylinders. Rolls are powered by a 2HP 230V/460V motor through ...
Elk Grove Village, IL
MOLD MASTERS MT-06-06 SIX ZONE 12777
used
- Manufacturer: Mold Masters
Mold masters model MT-06-06, six zone hot runner controller, S/N TMMT1210123 220-Volt, 3-phase operation, 40 Amp maximum load. Includes model VT12 power supply and a Square D 15 kVA transformer. Mounted on a cast...
Elk Grove Village, IL
MOLD MASTERS TMO-4220A10 HOT RUNNER 4904
used
- Manufacturer: Mold Masters
Mold Masters model TMO-422A10, S/N 92-0040. Hot runner controller, 4 zones, 230-Volt, digital display.
Elk Grove Village, IL
APM SBP-SS-10 Packaging Machinery
used
- Manufacturer: APM
- Model: SBP-SS-10
Good condition APM SBP-SS-10 Packaging Machinery. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword