Used Cnc Lathes in Illinois, USA

2018 AutoMate CNC Star SL6

• Manufacturer: AutoMate CNC

Spindle Turret Control Equipped With: Edge Technologies Rebel 102 Servo SE Bar Feeder

2024 Neway CNC Heavy duty Slant bed lathe w/ Fanuc control

• Manufacturer: Neway

NEW NEWAY 15” CHUCK HORIZONTAL CNC LATHE w/ FANUC Oi-TF PLUS CONTROL, 4.6" Bar capacity, Box Ways, ZF gearbox, 12 station turret, Air conditioned electrical cabinet, Chip conveyor, Programmable tail stock, Founda...

2006 Hankook 9NC

• Manufacturer: Hankook
• Model: 9NC

Max Swing Over Bed 37.4″ Max Swing Over Cross Slide 24.8″ Distance Between Centers 157.48″ Maximum turning length 151″ Spindle bore 9.875″ Min/Max Rpm 3 – 630 RPM Fanuc 21i-TB Control Front/Rear 24″ Manual Chucks...

1997 Used OKUMA LU15M CNC LATHE | Lathes CNC

• Manufacturer: Okuma
• Model: LU15

Imperial Metric Okuma Model LU-15M Twin Turret Live Milling CNC Lathe SWING OVER BED 20.87" SWING OVER CARRIAGE 14.96" SWING OVER CROSS SLIDE 12.99" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 23.62" T...

2020 Miyano GN3200W-2F3

• Manufacturer: Miyano

Miyano Gn3200w 2f3 Cnc Swiss Type Lathe Specifications (Subject to Buyer Verification): Machining Capacity and Chuck System Power Chuck Pneumatic 3″(4″) Precision Chuck Diaphragm Chuck Pneumatic 4″ Maximum Diamet...

2018 Automate CNC Star SL6 CNC Lathe ()

Imperial Metric Siemens CNC Control 6 inch Chandox hydraulic chuck 8 position tool changer Edge technologies bar feed 10 hp rotary 3 phase converter coolant recycling, coolant mist vent blower various tooling and...

2001 Nakamura Tome WT-250

• Manufacturer: Nakamura tome
• Model: WT-250

Cutting time – 4,926 hours Swing Over Bed 9.84” Swing Over Carriage 9.84” Max Turing Diameter 9.84” St. Turning Diameter 3.94” Max Turning Length 17.13” Max Bar Size 2.01” Spindle Motor 20 HP Spindle Speed 4500 R...

Mazak Tooling

• Manufacturer: Mazak

Mazak Qtn-450 Live And Static Tool Holders, Chuck Jaws

2006 Kingston CL-38

• Manufacturer: Kingston

FANUC oi-TC Control 24″ 4-Jaw Chuck Air Chuck 2000 rpm 2 Speed A2-11 Spindle 7.3″ Spindle Bore 26″ Swing Over Bed 14.6″ Swing Over Cross Slide 78″ Distance Between Centers 18.1″ Bed Width 21.26″ X-Axis Travels 76...

2013 Hurco TM-8

• Manufacturer: Hurco
• Model: TM8

Bar capacity 2.6″ Spindle speed 4,000 RPM Spindle motor 31 HP X axis travel 8″ Z axis travel 20″ Turret tools 12 Station Max turning dia 14″ Max turning length 20.6″ Max swing 20.6″ Weight 8,708 LBS Equipped With...

2017 Takisawa FX-600

• Manufacturer: Takisawa
• Model: FX600

Turning Diameter – 8.6″ Max Turning Diameter 11.8″ Max Turning Length 20″ X1/X2 Axis Travel mm (in) 180/180 (7.1/7.1) Z1/Z2 Axis Travel mm (in) 540/540 (21.2/21.2) Y Axis Travel mm (in) ±35 (±1.4) B Axis Trave...

DAINICHI CNC Roll Turning Engine Lathe Model DR112

• Manufacturer: Dainichi

DAINICHI CNC Engine Lathe Model DR112 Dainichi’s DRNC Series Roll Lathes have set the standards and raised the bar; strong enough to handle the largest rolls, with the rigidity to accurately machine the longest s...

2007 Mori Seiki NL-2000/500

• Manufacturer: Mori Seiki
• Model: NL-2000/500
• Spindle bore: 52 mm

Chuck Size 8″ Max Diameter Bar Capacity 2.5″ Max Machining Length 20.1″ Spindle Motor 24.8 HP Spindle Speed 5000 RPM Spindle Nose A2-6 Spindle Bore 2.9″ Rapid Traverse Rates 1181 IPM X-Axis Travel 10.2″ Z-Axis Tr...

1990 Mori Seiki SL-4T

• Manufacturer: Mori Seiki
• Model: SL-4
• Spindle bore: 52 mm

Turning CNC H.D. 3 HP / 60 Cycle / 220 Volts 12 Station Turret (8 + 4) Equipped With: 8″ Chuck Fanuc 6T Control Live Tooling RS232 Interface 2 Speed Gearbox Chip Conveyor 12 Station Turret 8″ Chuck Manuals 6 Bori...

2013 Mori Seiki CL-2000

• Manufacturer: Mori Seiki
• Model: CL-2000

Equipped with: Mori Seiki M730BM Control Chuck Shown Tooling Shown on Turret Rear Exit Chip Conveyor