Used Extruders in USA

GEA/Niro/Aeromatic E140 Radical Basket Extruder

• Manufacturer: Niro

GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...

Extruder Screws

*quantity Of 2 Name: Extruder Screws | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 156 x 10 x 5 | Weight (lb.): 1110 | Available quantity: 1

3 Hp Extruder

8.4/4.2a, 1755 Rpm Name: Extruder | Arrival date: 04-07-2025 | Dimensions l x w x h (inches): 34 x 47 x 56 | Capacity: 3 HP | Electrical: 3/50/60/230/380/460 | Weight (lb.): 935 | Available quantity: 1

Bonnot Single Screw Extruder

• Manufacturer: Bonnot

Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...

Jinhu 92MM Twin Screw Extruder

• Manufacturer: Jinhu

The Jinhu 92MM Twin Screw Extruder is a reliable used piece of industrial equipment designed for compounding applications, specifically for processing polyethylene (PE). It features a powerful 150 HP motor and op...

Gloucester Extruder

• Manufacturer: Gloucester

The Gloucester Extruder is a used 4.5-inch model equipped with an Extech Slide Plate Exchanger, ideal for recycling applications. This machine features a 30:1 L/D ratio and a 200 HP DC motor for robust and effici...

Hpm 3 1/4" X 154" Extruder

• Manufacturer: HPM

75 Hp, 1750 Rpm Name: Hpm Extruder | Arrival date: 06-26-2025 | Dimensions l x w x h (inches): 159 x 95 x 70 | Capacity: 3 1/4" X 154" | Electrical: 150/300/500V | Weight (lb.): 8430 | Available quantity: 1

LCI Extruder, model MG-55

• Manufacturer: LCI Fuji Paudal

LCI Extruder, model MG-55 Used LCI Extruder, model MG-55, stainless steel construction, with controller, 1 hp motor, 230 volt, serial# 3511953, built 2006.

WLS GABLER Mirrored Extruder System

• Manufacturer: WLS - Gabler

WLS GABLER Mirrored Extruder System Used WLS Gabler Spheronizing Pelletizing line, dual extruders into single spheronizer, stainless steel product contact surfaces, with (2) TA800/2 �agitated twin discharge screw...

10" Ventura Hydraulic Fab Horizontal Ram Extruder

• Manufacturer: Ventura Hydraulic Fabricators

10" Ventura Hydraulic Fab Horizontal Ram Extruder Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.

Reiloy Usa 194" X 7" X 9" Extruder Screw

• Manufacturer: Reiloy Usa

Made In Usa Name: Extruder Screw | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 222 x 11 x 10 | Capacity: 194" X 7" X 9" | Weight (lb.): 1425 | Available quantity: 1

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...

Reiloy Usa 192" X 7" X 8" Extruder Screw

• Manufacturer: Reiloy Usa

Made In Usa Name: Extruder Screw | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 200 x 9 x 9 | Capacity: 192" X 7" X 8" | Weight (lb.): 1545 | Available quantity: 1

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

0.25" Brabender Extruder, 48:1 L/D

• Manufacturer: Brabender

0.25" Brabender Extruder, 48:1 L/D Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.