Building Filters
- Trusted Seller
Ashbrook Simon Hartley KP-Mark-2 Klampress
- Manufacturer: Simon
Dewatering, desludging filter press - Cloth 1.2 meters wide. Mfg by Ashbrook Simon Hartley. Model KP-Mark-2 Klampress, Size 1. Serial 4530.7.167, S/R number 4530. Top belt size 1.2 x 11.920 meters, bottom bel...
Iowa, USA - Trusted Seller
2017 MACK GU713
- Manufacturer: Mack
- Model: GRANITE GU713
- Horsepower: 510 hp
- Mileage: 107,076 mi
2017 Mack Granite GU713 tri-axle Concrete Mixer Truck, 248" WB, MP7 Engine, 20k Front axle, 46k Rear axle, Low mileage 107K, 13600 hours, Housby 11 yd Mixer, 4700 Allison automatic transmission. 4 trucks availabl...
- Trusted Seller
2008 Vertical Tank 30,000 Gal Fiberglass (4)
- Manufacturer: ICM Standard Parts
Fiberglass 30,000 gallon Tanks. Tank size is 12 ft OD x 36 ft s/s. Flat bottom, slight dished top. Last used for methanator tanks in an ethanol wastewater process. There are 4 available, 3 pieces to each set. Pri...
Iowa, USA - Trusted Seller
2024 Rentech Waterfall "O" Type
- Manufacturer: Rentech
This is a brand new HRSG - never used. Model Waterfall Type "O" System has been completed (never has been used)We have complete shipping documents for number of pieces and sizes.
Iowa, USA - Trusted Seller
2009 Drying Solutions .
- Manufacturer: Drying Solutions
Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam. Approx conveying air feed 1,973 acfm at 266F to 288F. (Max inlet temp 680F). Last was running soybean meal In excellent operating condi...
Iowa, USA 
2016 UNIONTECH BETA RSPRO 600
- Manufacturer: UNIONTECH
New 3-Watt Laser X axis travel: 23.6" | Y axis travel: 23.6" | Z axis travel: 23.6" | Dimensions: 80" x 66" x 67" | Weight: 2,580
2017 UNIONTECH PILOT 250
- Manufacturer: UNIONTECH
New 3-Watt Laser X axis travel: 9.8" | Y axis travel: 9.8" | Z axis travel: 9.8" | Dimensions: 44" x 42" x 78" | Weight: 1,603
- Trusted Seller
2001 MAZAK 3D Fabri Gear-300 CNC Tube Laser with upgrade to Handle 12"
- Manufacturer: Mazak
- Model: 3D FABRI GEAR 300
NUMBER OF PROGRAMMABLE AXIS 6 MAX STEEL CUT THICKNESS 0.500" RAPID TRAVERSE RATE (X , Y ,Z, C) 1181 /945/787 IPM - 6000 deg/min NUMBER OF MATERIAL CHUCKS 4 MATERIAL UNLOADING -5 Stations MATERIAL LOADING -3 ...
Iowa, USA 
2005 HAAS TL2
- Manufacturer: Haas
- Model: TL-2
Spindle Nose A2-5 Max Torque 108 ft-lbf @ 355 rpm Bar capacity: 2" | Chuck size: 8" | Spindle speed: 2,000 RPM | Spindle motor: 10 HP | X axis travel: 8" | Z axis travel: 48" | Rapid rate z axis: 450 IPM | Turret...
- Trusted Seller
Carbis self leveling gangway, models TCG 1000 and TCG 2000
- Manufacturer: Carbis
Carbis self leveling gangway, models TCG 1000 and TCG 2000 Carbis self leveling gangway, models TCG 1000 and TCG 2000, max load of 500 lbs.
Iowa, USA - Trusted Seller
Goyum G-1500
- Manufacturer: Goyum
NEW, never installed. Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in i...
Iowa, USA - Trusted Seller
2007 Goyum G-1500
- Manufacturer: Goyum
This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007. Overall Machine Dimensions approx Length:3550 mm, Breadth:1300 mm, Heig...
Iowa, USA - Trusted Seller
2007 Sharplex VPLF
- Manufacturer: Sharplex
Sharplex vertical filter presses with structural steel frames. Pressure leaf filters. Capacity 8 sq meters (86 sf) 6 bar at 150 C (90 psig at 300F). There are 3 of these filters - and a place in the structure...
Iowa, USA - Trusted Seller
2026 Can-Am Renegade X XC 1000R ATVs
- Manufacturer: Can-Am
- Model: RENEGADE X XC 1000R
- Horsepower: 91 hp
- Axle configuration: 4x4
Trail adventures with power to spare and handling that hangs on to terrain at your command—of course it's the X xc. Ripping the now 91 horsepower 1000R has never come with so much confidence over terrain—a fully ...
- Trusted Seller
2026 Can-Am Defender DPS CAB HD10 Utility Vehicles
- Manufacturer: Can-Am
- Model: Defender HD10
- Horsepower: 82 hp
- Transmission type: Automatic
The most affordable CAB HVAC in the industry. Powered by the HD10 Rotax engine, the Defender DPS CAB with HVAC delivers year-round comfort, control, and performance built for hard work. Leading Engine:CLASS-LEADI...
Dreis & Krump 135 Press Brake
- Manufacturer: Dreis & Krump
- Model: 135
Good condition Dreis & Krump 135 Press Brakes. Located in USA and other countries. Click request price for more information.
USA