Used Machine Tools in Indiana, USA

Kanto Seiki CL300B-U-Z-1 Oilmatic Hydraulic Oil Chiller Temp Regulator 220V 3Ph

• Manufacturer: Kanto Seiki

Used, in Good Working Condition. Came off of a working machine. Controls were with the main machine. This has a 34 liter tank. If this item ships as Flat Rate Freight please see details in Shipping tab

Kanto Seiki KVT-7.5D-HR6-N Oilmatic Oil Chiller Temp Regulator 0.75kw 220V 3Ph

• Manufacturer: Kanto Seiki

Used, in Good Working Condition. Came off of a working machine. Controls were with the main machine. Coil sits in the oil. 14.5" depth Coil OD is around 14" Will need a 15.5x15.5" mounting hole. Unit is 20x19x36"...

Kanto Seiki V750A-HU Oilmatic Hydraulic Oil Chiller Temp Regulator 220V 3Ph

• Manufacturer: Kanto Seiki

Used, in Good Working Condition. Came off of a working machine. Controls were with the main machine. Coil sits in the oil. The cabinet for this unit measures about 14-1/2" x 17-1/2" x 32" tall. The depth of the c...

Okuma OEO-OKM-MA-1 Oil Controller Chiller Unit 750W Compressor 200V 3Ph 15g Tank

• Manufacturer: Okuma

Used, in Good Working Condition. Removed From a Working Environment. This unit was pulled from a working machine a few weeks ago. Oil stains on outside. Has 15 gallon tank with 2 oil pumps. If this item ships as ...

Kanto Seiki KVT-5C-HA1 Oilmatic Oil Chiller Temp Regulator 220V 3Ph

• Manufacturer: Kanto Seiki

Used, in Good Working Condition. Coil sits in the oil. 12" depth. Coil OD is around 10" Will need a 13x12" mounting hole. Unit is 16x17x31" without coil If this item ships as Flat Rate Freight please see details ...

Turbo Systems 40"x 14' CNC Scrap Chip Conveyor Low Profile 230/460V 3PH 10FPM

• Manufacturer: Turbo Systems

In Good Used Condition. Tested and cleaned in our shop. Tested @460V. Turbo Systems Scrap/Chip Conveyor. 40" Frame width, 34-3/4" between frame. 34" bed width. 14' 1" Overall length. Gear Motor: 1/2Hp 1140 RPM...

Chip Blaster JV40MAK Coolant System High Pressure Pump 480V 40LPM Dual Filter

• Manufacturer: ChipBlaster

Used, in Good Working Condition. Removed From a Working Environment. Recovery System for a Chip Blaster 480V 3 phase High pressure plunger pump. 7.5hp Model 2119 8x34" Filter housing. 48x24x22" coolant holding ta...

Hennig CNC Chip Conveyor 16"x 67" Infeed 31-35" Discharge 230/460V 3PH

• Manufacturer: Hennig

In Good Used Condition. Tested and cleaned in our shop. Tested @230V Enomoto Chip Conveyor. 230/460V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto CNC Chip Conveyor 16"x 67" Infeed 46-50" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Tested @220V Enomoto Chip Conveyor. 220V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto CNC Chip Conveyor 16"x 67" Infeed 47-51" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Tested @220V Enomoto Chip Conveyor. 220V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Magnetic Incline CNC Chip Conveyor 11"x 64" Infeed 40" Discharge 230V 3PH

In Good Used Condition. Tested and cleaned in our shop. No tag or brand on conveyor, steel frame magnetic slide type. Welded front leg support is 11-3/4" off the floor. 8"W x 9"H Side infeed access on front and...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 31" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. -Chain guard is missing. Conveyor has an added chute welded on top of frame. Add on chute measures 16"W x 12"H x 66.5"L Measurement...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 36-42" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute on top with drain trays. This chute can be removed. Add on chute measures 15.75"W x 12.5"H x 66.5"L Dra...

Enomoto Hinge Belt CNC Chip Conveyor 15"x 62" Infeed 40" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute with welded drain trays. This chute can be removed. Add on chute measures 16"W x 12.5"H x 66.5"L Drain ...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 88" Infeed 46" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute welded on top of frame. Top chute measures 14"W at infeed then back to 16" wide. 88" Length. 5" Conveyo...