Used Machine Tools in Iowa, USA

4L Gisholt Saddle Type Turret Lathe

• Manufacturer: Gisholt

4L Gisholt Saddle Type Turret Lathe Features 12-1/2″ diameter hole through spindle 24″ 4-jaw chuck with 9-1/2″ hole Bar stock support (rear) Threading Specifications

LANDIS 2 in THREADING MACHINE #83038

• Manufacturer: Landis

SPECIFICATIONS: EQUIPPED WITH: COOLANT PUMP MANUAL FEED SPECIFICATIONS SUBJECT TO VERIFICATION

PRESS BRAKE DIE #87242

V: 4 inches | Length: 24.5 inches | Height: 5 inches

JET JMD-15 #85662

• Manufacturer: JET
• Model: JMD-15
• Drilling diameter: 25.4 mm

DETAILS: Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine's table for flexibility and efficiency. A loc...

JET JDP-20VS-1 #85660

• Manufacturer: JET
• Model: JDP-20VS-1
• Drilling diameter: 28.58 mm

DETAILS: Solid design and construction deliver precision operation and control. JET 20” Variable Speed Drill Presses combine variable speed spindles with a massively constructed head that increases accuracy and r...

POWERMATIC 1200 #79256

• Manufacturer: Powermatic
• Model: 1200
• Throat depth: 228.6 mm

FEATURES: T-SLOTTED BASE EQUIPPED WITH: COMMANDER MULTI-DRILL HEAD (M#3-22, S#14CV42) **6 SPINDLES ** DRILL FIXTURE NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE

BOICE CRANE 20600 #86822

• Manufacturer: BOICE CRANE
• Throat depth: 254 mm

Equipped With: Jacobs Drill Chuck Dimensions: 25" x 32" x 84" | Throat: 10 inches | Spindle speeds: (8) 120 to 1640 RPM | Table size: 17.25" x 21" T-Slotted | Transformer electrics: 240 Volt, 3-Phase

SPRUNGER NDP15 #85649

• Manufacturer: SPRUNGER

15" Bench Top Drill Press Equipped With: Chuck Table size: 37x25x29

JET JDPE-20EVS-PDF #85661

• Manufacturer: JET
• Model: JDPE-20EVS-PDF
• Drilling diameter: 31.75 mm

DETAILS: The 20'' JET JDPE-20EVS-PDF Drill Press produces high torque at all speeds in both forward and reverse necessary for a wide range of operations. Spindle is supported by high quality ball bearings reducin...

SOLBERGA SE725 #81877

• Manufacturer: Solberga
• Model: SE-725

SPECIFICATIONS: 8 SPEEDS 120-240 RPMS 175-350 RPMS 525-1050 RPMS 775-1548 RPMS POWER FEED 220/3ph EQUIPPED WITH: 5 in DRILL VISE SPECIFICATIONS SUBJECT TO VERIFICATION

ELLIS 9400 #86228

• Manufacturer: Ellis
• Model: 9400
• Drilling diameter: 40 mm

SPECIFICATIONS: FEATURES: - POWER DOWN FEED - VARIABLE SPEED FROM 0-1200 RPM - ADJUST SPEEDS WHILE OPERATING IN THE MATERIAL - HIGH TORQUE AT LOW RPM SPEEDS - INSTANTANEOUS REVERSING FOR TAPPING - TAPPING HEAD IS...

24” x 92” Lansing G-24 Hollow Spindle Lathe

• Manufacturer: Lansing
• Spindle bore: 165.1 mm

24” x 92” Lansing G-24 Hollow Spindle Lathe Features (2) 17" 3-jaw chucks with 6" hole 4-way toolpost 6-position turret style carriage stop Work light Specifications Diameter of bore through spindle: 6-5/16" This...

ELLIS 9400 #82634

• Manufacturer: Ellis
• Model: 9400
• Drilling diameter: 40 mm

SPECIFICATIONS: FEATURES: - POWER DOWN FEED - VARIABLE SPEED FROM 0-1200 RPM - ADJUST SPEEDS WHILE OPERATING IN THE MATERIAL - HIGH TORQUE AT LOW RPM SPEEDS - INSTANTANEOUS REVERSING FOR TAPPING - TAPPING HEAD IS...

WILTON 24500 #85457

• Manufacturer: Wilton

60 Hz 3 PHASE POWER SUPPLY Table size: 20" x 24" | Motor: 440 Volts | Hp: 1.3-1.6 | Amp: 2.1-2.3

YOSHIDA YD3-65N #52211

• Manufacturer: Yoshida
• Model: YD3-65N

SPECIFICATIONS: EQUIPPED WITH: TAPPING CYCLE COOLANT PUMP WITH TANK GEAR HEADED CAM DOG STOP NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE