Used Rolling Mills (Metalworking) in New York, USA

1975 60" Wide United Hot Mill w/2-Hi Roughing & 2-Hi

• Manufacturer: United

Tons per year: 90,718.5 tonnes | Mx plate w: 1,524 mm | Mx plate t: 89 mm | Mx plate l: 6 meters | Maximum input slab thickness: 89 mm

500,000 Tpy SMS Melt Shop & 16-Stand Mill, 60ton EAF,

Tpy: 453,592.4 tonnes | Builders: SMS | Caster type: 3-Strand | Eaf: 60 ton | Lf: 60 ton ladle | Rolling mills: 16-Stand rough/finish

1947 3/8" x 8' BERTSCH MODEL:8 INITIAL PINCH PLATE ROLL,

• Manufacturer: Bertsch

MAX. CAPACITY (MILD STEEL) ............... 8' x 3/8" DIAMETER OF ROLLS ........................ 9" MAIN DRIVE MOTOR ......................... 10 HP REAR ROLL ADJUSTMENT MOTOR ............... 7.5 HP EQUIPPED WITH:...

1,250mm wide 6-Hi China Built Cold Mill (4) 1350kW

Width: 1,250 mm | Max thick: 3mm (0.118") | Min thick: 0.3mm (0.0118") | Mill type: 6-Hi | Builder: China Built | Speed: 800 Mpm | Age/upg: 2012

1985 400 x 1,000 x 800mm Skoda KSK 90 4-Hi

• Manufacturer: Skoda

This Mill includes the following Line Components: • Power UnCoiler with 760kW (1,020hp) Drive • Power Coiler with 760kW (1,020hp) Drive • 4-Hi Mill Stand with 1,770kW (2,375hp) Drive • Strip Leveler at entry side...

37" x 84" SMS 2-Hi Reversing

Additional info: Equipped with the following: 3,084 hp drive system with 2-Hi Pinion Stand Electro-Mechanical Screwdowns (11.8" travel) (2) Centering Devices (2) Gripper / Tilters Spare Rolls, Chocks and Rest Bar...

1980 6 to 30mm Moller Neuman & Toshiba Wire, Bar

• Manufacturer: Toshiba

Mx ø: 30 mm | Mn ø: 6 mm | Tpy: 250,000 tonnes | Mill type: Wire, Bar & Sections Mill | Mx billet: 130 mm | Builder: Moller Neuman | Max rod dia: 30 mm | Min rod dia: 6 mm | Max wire dia: 30 mm | Min wire dia: 6...

160 x 415 x 600mm Chang Zo (Korea)

Additional info: Line Description - Payoff reel (non drive) - Tension reel (L/R) : 55kw DC (550/1750rpm) - Mill stand : 110kw DC (550/1750rpm) - Coil car (L/R) - Bridle roll (L/R), 30kw DC (40hp) - Thickness gage...

AMS model BCD I 810 Flying type

• Manufacturer: AMS

Additional info: Range: Ø 20 mm max. Speed: 15 m/s max. Machine complete with entry pinch roll but is w/o main motors Floor to cutting Centerline - 900mm Shear footprint 1,300mm L to R x 1,650mm F to B Top of mac...

Pomini VM 10-V Flying type

• Manufacturer: Pomini

Additional Info: Serial n. 9469 Year: 1987 Version: Left Internal Ratio: 1,17:1 Axis of work: 1,300 mm Blade dimension: 25 x 90 mm Brake: “Twiflex” MS – 4” Shear footprint 1,170mm L to R x 820mm F to B Top of mac...

Danieli CV12 12mm dia Flying type

• Manufacturer: Danieli

Additional Info: Model: CV 12 - Right version Range: Ø 12 mm max. Speed: 20 m/s max. DC Motor: "Brown-Boveri" - 40kW - 0-2000rpm Weight: 3,000 kgs Floor to Bar Centerline - 1,080mm Shear footprint 1,900mm L to R ...

8” x 8” x 1” Herkules model BO234l

• Manufacturer: Herkules

Additional Specifications as follows: ANGLES LEG OUT ............ 8" X 8" X 1" @ 120" ANGLES LEG IN ............. 4" X 4" X 5/8" @ 40" PLATES ON FLAT ............ 12" X 2-3/4" @ 48" SQUARES ................... 4-...

AMS model BCD I 504 Flying type

• Manufacturer: AMS

Additional info: Range: Square 45 mm Speed: 2,5 ÷ 3,5 m/s Axis: 900 mm Blade: 35 x 120 mm Floor to cutting Centerline - 900mm Shear footprint 1,100mm L to R x 1,450mm F to B Top of machine to Floorline - 1,480mm ...

172mm (6-3/4") Aetna Standard Complete

• Manufacturer: Aetna Standard

Complete Line with the Following Components: Entry Billet Loader Rotary Furnace Billet Centering Press Piercing Mill Transval Elongator Induction Furnace Chain Transfer to Reducing Mill 10-Stand Reducing Mill Rot...

126" wide x 2" thick Sket UBR 40x3150

• Manufacturer: Sket
• Model: UBR 40X3150-712

Vertical roll adjustment motor Mx w: 3,200 mm | Mx thk: 48 mm | Wk roll ø: 340 mm | Builder: Sket | Roll config: 4 over 3 | Speed: 12 Mpm | Max plate thickness at max plate width: 48 mm | Minimum plate thickness:...