Building Filters
- Trusted Seller
Crown WP3035-45 electric 4500lb walk behind pallet jack trucks
- Manufacturer: Crown
- Model: WP 3035-45
- Lifting capacity: 2,020 kg
- Fuel type: electric
(10) 2021 Crown WP3035-45 electric 4500lb walk behind pallet jack trucks. These run well with batteries, and have approximately 290 hours. $2900 each fob OH
$2,900 USDOhio, USA - Trusted Seller
Raymond 7700R45TT electric narrow aisle 4500lb stand up rider reach trucks
- Manufacturer: Raymond
- Lifting capacity: 4,500 kg
- Fuel type: electric
(2) 2017 Raymond 7700R45TT electric narrow aisle 4500lb stand up rider reach trucks. These are clean, run well, have approximately 11700 hrs, and come with 36v batteries, side shift attachments, and triple stage ...
- Trusted Seller
1994 Cleaver Brooks CBI200-250
- Manufacturer: Cleaver-Brooks
This is a 250 HP 150 PSI steam boiler! This will be a 250-horsepower engine with heavy oil controls, including heaters. Updated controller.
Ohio, USA - Trusted Seller
Vector Model GMX-600, 600 Liter Stainless Steel High Shear Granulator
- Manufacturer: Vector
Vector Model GMX-600, 600 Liter Stainless Steel High Shear Granulator - Allen Bradley PanelView 1000 - Remote mounted electrical cabinet - Serial No. GMX-130 45575 - Lightly used - new 2005
Ohio, USA - Trusted Seller
ALLIANCE SINGLE STATION PLUGGER
- Manufacturer: Alliance
ALLIANCE SINGLE STATION PLUGGER ALLIANCE PLUG INSERTER/PRESS, SET FOR APPROX. 2" DIAMETER SNAP IN CAP, SINGLE STATION, MOORE-FEED MODEL 7630 VIBRATORY BOWL FEEDER, AIR OPERATED CONTAINER GRIPPER ARMS, A.B. MODEL ...
Ohio, USA - Trusted Seller
GEA/Niro/Aeromatic E140 Radical Basket Extruder
- Manufacturer: Niro
GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...
Ohio, USA - Trusted Seller
Fuji QJ700 Marumerizer Spheronizer
- Manufacturer: Fuji
Fuji QJ700 Marumerizer Spheronizer - Stainless steel - Jacketed bowl - 2 mm grooved spheronizing plate - Plate lift mechanism - Side discharge with pneumatically operated plug valve - Serial No. 20050
Ohio, USA - Trusted Seller
Bosch Paloma D32R Pick and Place Robot
- Manufacturer: Bosch
Bosch Paloma D32R Pick and Place Robot - Two picking heads - Product conveyor - Up to 60 picks/minute
Ohio, USA - Trusted Seller
Brookfield Digital Viscometer
- Manufacturer: Brookfield
Brookfield Digital Viscometer - Model: RVTD - Speed range: 0.1 to 100 RPM - Viscosity range: 0.01 to 10,000,000 cP - Accuracy: ± 1% - Resolution: 0.01 cP - Repeatability: ± 0.2% - Spindle range: RV-1 to RV-7 - Te...
Ohio, USA - Trusted Seller
Cama Robotic Case Former, Loader and Closer Model IF 316
- Manufacturer: Cama
Cama Robotic Case Former, Loader and Closer Model IF 316 - Model IF 316 - Serial#20180010IF316A - Built 2018 Type: Robotic case former, loader, and closer All In One Forming Closing And Loading Cabinet Free Onboa...
Ohio, USA 
2023 HAAS DS30Y
- Manufacturer: Haas
- Model: DS-30Y
Swing Front Apron 31.8" Swing Over Cross Slide 20.8" Swing Second Spindle 21.8" Max Thrust X 4100 lbf Max Thrust Y 2300 lbf Max Thrust Z 5100 lbf Spindle Nose A2-6 Drive System Direct Speed Max Torque 275 ft-lbf ...
- Trusted Seller
150 HP Cleaver Brooks 150 PSI Steam Boiler Rental 1988 Model CB700-150
- Manufacturer: Cleaver-Brooks
Used Cleaver Brooks Steam Boiler 5,175 steam lbs/hr, 6,277,000 BTU/hr, Model CB700-150, 150 HP, MAWP 150 PSI, Fuel Natural Gas, Operation Weight 46,000 lbs, Built 1988 Cleaver Brooks 150 HP 150 PSI High Pressure...
Ohio, USA - Trusted Seller
150 HP Cleaver Brooks 150 PSI Steam Boiler Room 1976 Model CB200-150
- Manufacturer: Cleaver-Brooks
Used Cleaver Brooks Steam Boiler 5,175 steam lbs/hr, 6,227,000 BTU/hr, Model CB700-200-150, 150 HP, MAWP 150 PSI, Fuel Natural Gas, Serial No L-62591, Shipping Weight 46,000 lbs, Built 1976 Cleaver Brooks 150 HP...
Ohio, USA 
2004 DMG DMF220
- Manufacturer: DMG Mori
Chip Conveyor Coolant Filtration X axis travel: 86" | Y axis travel: 22" | Z axis travel: 24" | Table size: 24" x 102 1/4" | Spindle speed: 12,000 RPM | Tool changer: 30 ATC
1999 MAZAK INTEGREX 200SY
- Manufacturer: Mazak
- Model: INTEGREX 200SY
Y-Axis Travel (Y1, Y2, Y3) +/- 2.75" Main Spindle Bore Diameter 2.4" Main Spindle Maximum Bar Work 2" Main Spindle Horsepower (CONT. /30 MINS) 20/ 30 Sub Spindle/2nd Spindle Chuck Size 8 Sub Spindle/2nd Spindle B...
Mazak MTV-655/80 Machining Center
- Manufacturer: Mazak
- Model: MTV-655/80
Good condition Mazak MTV-655/80 Machining Centers available between 1998 and 2001 years. Located in USA and other countries. Click request price for more information.
USA