Used Processing in Kansas, USA

SULLAIR CORP SCREW AIR COMPRESSOR MODEL 25-100H, 100HP

• Manufacturer: Sullair
• Model: 25-100H

SULLAIR CORP SCREW AIR COMPRESSOR MODEL 25-100H, 100HP SULLAIR CORPSCREW AIR COMPRESSORMODEL #25-100HB.O.M. #6726HSERIAL #003-53605RATED/MAX PRESS 115/125PSIG100HP230/460VBUILT IN 1982WATER COOLEDLINCOLN AC LINCG...

SULLAIR ROTARY SCREW AIR COMPRESSOR MODEL 20-100L, MAX PRESS 110 PSIG

• Manufacturer: Sullair

SULLAIR ROTARY SCREW AIR COMPRESSOR MODEL 20-100L, MAX PRESS 110 PSIG SULLAIRROTARY SCREW AIR COMPRESSORMODEL: 20-100LSERIAL NO. 23420-JGEMAX PRESS: 110 PSIGAPPROX OVERALL DIMENSIONS: 113" x 61" x 95"**PLEASE VIE...

BESTRONIC T14-8 SHRINK WRAP SYSTEM

• Manufacturer: BESTRONIC

“NOT TESTED SOLD AS IS.” BESTRONIC SHRINK WRAP SYSTEM OPENING IS 14X8" CAN WRAP BETWEEN 5-15 PACKAGES PER MINUTE 115 VOLTS 60 HERTZ 1-PHASE AC ONLY MODEL NO. T14-8 OVER-ALL DIMENSIONS 53" H X88" L X29" D *PLEASE ...

HYDRAULIC PUMP WITH RESERVOIR AND HEAT EXCHANGER

• Manufacturer: HYDRAULIC PUMP

HYDRAULIC PUMP WITH RESERVOIR AND HEAT EXCHANGER FELDMAN INC.HYDRAULIC PUMP5 HPWITH RESERVOIRANDTHERMAL TRANSFER PRODUCTS LTDHEAT EXCHANGERAD-5400*F300 PSI PLEASE READ BEFORE BIDDING, MAKING AN OFFER, OR PURCHASI...

GREENHECK CUBE-140-3-G #83991

• Manufacturer: Greenheck

SPECIFICATIONS: SPECIFICATIONS SUBJECT TO VERIFICATION

GREENHECK CUBE-100-4-G #83988

• Manufacturer: Greenheck

SPECIFICATIONS: SPECIFICATIONS SUBJECT TO VERIFICATION

SMC E/P REGULATOR ITV3050-01N4L4 4-20MADC INPUT 0.7-127PSI OUTPUT

• Manufacturer: SMC

“NOT TESTED. SOME RUST ON THE TEE. SOME SCRATCHES IN THE REGULATOR BODY.” SMC E/P REGULATOR ITV3050-01N4L4 4-20MADC INPUT 0.7-127PSI OUTPUT 1/2" IN, OUT, EXH PORTS **NOT TESTED. SOME SCRATCHES IN THE REGULATOR BO...

SMC E/P REGULATOR ITV3050-01N4L4 4-20MADC INPUT 0.7-127PSI OUTPUT

• Manufacturer: SMC

“NOT TESTED.” SMC E/P REGULATOR ITV3050-01N4L4 4-20MADC INPUT 0.7-127PSI OUTPUT WITH 1/2" TEE, 1/2" HOSE ADAPTERS AND 1/4" HOSE ELBOW 7X5X5", 3LBS SC-#965-SDR C-A8 TOTE 9-(1)SO

ZERO POLYGUARD PLASTIC MATERIAL 50 FT MP9000-2.500

“MISSING SOME LENGTH” ZERO POLYGUARD PLASTIC MATERIAL 50 FT MP9000-2.500 ZERO MANUFACTORINGPLASTIC ETCHING MATERIALP#: MP9000-2.500***GUESTIMATE OF 40 FT LONG PER SPOOL***WIDTH: 2-1/2"OAL DEMENSIONS: 19" X 19" X ...

GE GENERAL ELECTRIC CONDENSER FAN MOTOR 5KCP39GGC521ET 460V 60/50HZ 1625RPM

• Manufacturer: GE

“MAY HAVE SHELF WEAR. MOTOR PARTS ENVELOPE INCLUDED” GENERAL ELECTRIC CONDENSER FAN MOTOR P/N: 5KCP39GGC521ET RPM: 1625 HZ: 60/50 AMP: .80 VOLTS: 460 HP: 1/4 - 1/6 SHAFT EXTENSION 6" X 1/2" OAD: 12" X 6" X 6...

INGERSOLL FACE MILL CUTTER 6X9D04R01, 53067-D, W/TOOLHOLDER, 4" CUT, 8 FLUTE

• Manufacturer: Ingersoll Rand
• Model: R4

INGERSOLL FACE MILL CUTTER 6X9D04R01, 53067-D, W/TOOLHOLDER, 4" CUT, 8 FLUTE INGERSOLLFACE MILL CUTTER6X9D04R0153067-D4" CUT8 FLUTEW/TOOLHOLDERAPPROX OVERALL DIMENSIONS4" DIAM X 9 3/4" PLEASE READ BEFORE BIDDING,...

AGC PRO5-LH FLOW GASKET, AGPRO502E, EPDM, 8397, PORT HOLES 4" LOT OF 10

• Manufacturer: AGC

“OLD STOCK” AGC PRO5-LH FLOW GASKET, AGPRO502E, EPDM, 8397, PORT HOLES 4" **LOT OF 10** AGC PRO 5 LH-HEAT EXCHANGER FLOW GASKETMODEL: AGPRO502EMATERIAL: EPDMCOLOR: BLACKPORT HOLE SIZE: INNER DIMENSIONS: 4"OUTER D...

AGC PRO5-RH FLOW GASKET, AGPRO501E, EPDM, 8398, PORT HOLES 4" LOT OF 10

• Manufacturer: AGC

“OLD STOCK” AGC PRO5-RH FLOW GASKET, AGPRO501E, EPDM, 8398, PORT HOLES 4" **LOT OF 10** AGC PRO 5 RH-HEAT EXCHANGER FLOW GASKETMODEL: AGPRO501EMATERIAL: EPDMCOLOR: BLACKPORT HOLE SIZE: INNER DIMENSIONS: 4"OUTER D...

DRESSER-RAND, PLATE VALVE, H56068D, 2 PK

• Manufacturer: DRESSER-RAND

“NOT IN ORIGINAL PACKAGING” DRESSER-RAND, PLATE VALVE, H56068D, 2 PK DRESSER-RAND PLATE VALVE ( FOR COMPRESSOR)H56086D 2 PACKNEW JUST NOT IN ORIGINAL PACKAGINGOLD STOCKPLEASE READ BEFORE BIDDING, MAKING AN OFF...

SPLIT CAST IRON SHAFT COLLAR, LINK BELT, 6 1/2" SHAFT, 10 1/2" OD, 2 3/4" THICK

• Manufacturer: Link-Belt

SPLIT CAST IRON SHAFT COLLAR, LINK BELT, 6 1/2" SHAFT, 10 1/2" OD, 2 3/4" THICK SPLIT CAST IRON SHAFT COLLARLINK BELTAPPROX. DIMENSIONS:6 1/2" SHAFT10 1/2" OD2 3/4" THICKPLEASE READ BEFORE BIDDING, MAKING AN OFFE...