Used Wire Bending in Pennsylvania, USA

Wire Bending Bench

Wire Bending Bench

LUBOW 4-SAB

• Manufacturer: Lubow

1 wire: 1/2" | 3 wires: 3/8" | 4 wires: 5/16" | 8 wires: 1/4" | 11 wires: 3/16" | 16 wires: 1/8" | Equipped with: Can Make 1,2,3 Or 4 Bends Per Cycle 8' Max Distance Between Bends Up To 40,000 Bends Per Hour Usi...

LUBOW ML 6

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Wire 2 Pieces 3/8" Wire | Rotation: 400 Degrees | Rotating disc: 6" | Table size: 24" x 60" | Equipped with: With Infinitely Adjustable Bending Post Position & Foot Pedal

LUBOW ML-200

• Manufacturer: Lubow

Capacity: 8 Pieces of 1/4" Wire | Rotation: 400 Degrees | Rotating disc: 10" | Number of stops: Up To 8 | Table size: 2' x 5' | Approx. weight: 750 LBS | Equipped with: Various Tooling

LUBOW WBR 1

• Manufacturer: Lubow

Capacity: 8 Pieces at 1/4" 1 Piece at 1/2" | Rotation: 0 - 135 DEG | Table size: 2' x 6' | Approx. weight: 750 LBS | Equipped with: Foot Pedal

DIACRO #2

• Manufacturer: Di-Acro

Maximum radius without quik-lok: 9" | Maximum radius with quik-lok: 7" | Height of standard forming nose: 1" | Operating leverage: 29" | Round mild steel bar capacity: 1/2" | Square mild steel bar capacity: 3/8"...

LUBOW WBR-1

• Manufacturer: Lubow
• Model: WBR-1

Capacity: 1/2" 1 Piece | Table size: 24" x 72" | Adjustable bend angle: 0 - 135 Degree | Equipped with: With Automatic Turret and One Adjustable Die For All Wire Sizes

LUBOW WBR-1

• Manufacturer: Lubow
• Model: WBR-1

Capacity: 1/2" 1 Piece | Table size: 24" x 72" | Adjustable bend angle: 0 - 135 Degree | Equipped with: Automatic Turret, 1 Adjustable Die For All Wire Sizes

LUBOW ML 6

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Round Wire | Rotation: 400 Degees | Rotating disc: 6" | Table size: 24" x 60" | Approx. weight: 700 LBS | Equipped with: Foot Pedal

OMCG 630

• Manufacturer: OMCG
• Wire diameter: 8.0 mm

Mechanical feeding: from 0 up to 24.8" (630mm) | Wire diameter range: 0.315" (8mm) | Strip width: 1" (25mm) | Maximum strip thickness: 0.08" (2mm) | Approx. weight: 4500 lbs | Approx. floor size: 144" x 47" x 7...

LUBOW DWB 2

• Manufacturer: Lubow

Rotation: 225 DEG | Max distance between bends: 3' | Minimum distance between bends: 4 1/2" | Equipped with: Bending Angles Independent in Each HeadSolid Center Post

Pneumatic Bender

LUBOW ML 6

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Diameter | Rotation: 400 Degrees | Rotating disc: 6" | Number of stops: 8 | Table size: 2' x 5' | Approx. weight: 650 LBS | Equipped with: Air OperatedFoot Pedal

Car-Anth Pneumatic Power Former

• Manufacturer: Car-Anth

Table size: 8" x 31" | Center disc: 6" | Center pin: 1/2" | Equipped with: Foot Pedal