Used Wood Sawmills in Oregon, USA

Salem Sawmill Trimmer, Heavy-Duty Sawmill Trimmer

Used Salem Heavy-Duty, 24' Left-Hand, 6" Capacity Sawmill Trimmer. Airlift saw assemblies are v-belt driven in enclosed units, all powered from common shaft driven by a 30 HP, 440-volt motor. Table has even end...

L.S.I. Sawmill Trimmer, 20' Right-Hand Airlift Sawmill Trimmer

Used L.S.I. 20' Right-Hand Airlift Sawmill Trimmer. Individual 10 HP, 1800 RPM motors, v-belt driving 27" carbide saws on 1-15/16" arbors running at 2,333 RPM's. No controls, but does have whisker switches and ...

2019 KENTWOOD Model VBR-30 Vertical Band Resaw

One Used 2019 KENTWOOD Model VBR-30 Vertical Band Resaw S/N 14560, with 30 HP motor 480/240 volt, with 1 HP Inverter feed motor variable feed 0 - 45 m/per minute. Wheel diameter 800 mm (31 1/2"). Maximum capacit...

Kimwood Tri-State Resaw or Ripsaw Feedroll Package New Variable Speed

One (1) New Kimwood Tri-State Variable Speed Resaw or Ripsaw Feedroll Package. Free standing unit will open to handle up to 8" X 8" stock. Solid state DC variable speed drives include starters and a transformer....

Kimwood/Tri-State Roll Feed Resaw, Model T-36-4 36" Single-Band Tilting Roll Feed Resaw

Used Kimwood/Tri-State Model T-36-4 36" Single-Band Tilting Roll Feed Resaw, S/N 11-3-70-162. Feed rolls tilt up to 45-degrees. Feed speeds from 10 to 250 FPM. 3-1/2"-wide wheel for 4"-wide band or narrower. ...

Irvington Trimmer and End Waxer, Model 62 Precision 2-Saw Trimmer and End Waxer

Irvington Model 62 Precision 2-Saw Trimmer and End Waxer. Two (2) 7-1/2HP arbor motors with carbide saw blades. Trims lumber from 4-1/2' to 10' and is accurate to within 1/64". 4" maximum thickness. Powered e...

Log Splitter – 25 Ton 3-Pt

Log Splitter – 25 Ton 3-Pt Tractor Mounted Log Splitter Information Taken from the Pt# BE-LS25T3PT Operations and Part Manual Specifications: Height (Horizontal/Vertical Position) 41.8 / 72.3″ See our other Wood ...

Debarker Outfeed System Built By Lindsay

• Manufacturer: Lindsay

Used Debarker Outfeed System Built By Lindsay. Opens to 35". 46" clearance right to left. It has 20" wide x 32" diameter top and bottom traction rolls with 3-7/16" dia. shafts. The bottom roll is driven with ...

Debarker Outfeed System Built By Lindsay

• Manufacturer: Lindsay

Debarker Outfeed System Built By Lindsay. Opens to 35". 46" clearance right to left. It has 20" wide x 32" diameter top and bottom traction rolls with 3-7/16" dia. shafts. The bottom roll is driven with a hyd...

Lindsay Debarker Outfeed System, Debarker Outfeed System Built By Lindsay

• Manufacturer: Lindsay

Debarker Outfeed System Built By Lindsay. Opens to 35". 46" clearance right to left. It has 20" wide x 32" diameter top and bottom traction rolls with 3-7/16" dia. shafts. The bottom roll is driven with a hyd...

CANTEK Vertical Band Resaw, Model HB-900-HA 35-1/2" Vertical Band Resaw

• Manufacturer: Cantek

Used CANTEK Model HB-900-HA 35 1/2" Vertical Band Resaw FEATURES Heavy fabricated steel main frame (No pit required as frame is high enough to support bottom wheel up off the floor) Cast iron table (55" x 33-1/2...

CANTEK Vertical Band Resaw, Model HB-900-HA 35-1/2" Vertical Band Resaw

• Manufacturer: Cantek

Used CANTEK Model HB-900-HA 35 1/2" Vertical Band Resaw FEATURES Heavy fabricated steel main frame (No pit required as frame is high enough to support bottom wheel up off the floor) Cast iron table (55" x 33-1/2...

Resaw Infeed Conveyor System

Used Resaw Infeed Conveyor System with 12" wide belt, 19' long (on 20" wide pulleys), 8" wide sticker belt, 22' long driven by 3HP motor, adjustable width fences for receiving boards from 6-81X chainways feeding ...

Brewco B-1600 Wood Sawmill

• Manufacturer: Brewco
• Model: B-1600

Good condition Brewco B-1600 Wood Sawmills manufactured in 2015. Located in USA and other countries. Click request price for more information.