- Trusted Seller
CAMU 1550x2mm S.S. CTL Line, Roll Feeder Type #0042.1
used
- Manufacturer: CAMU
Year: 2003 In stock - very good condition ELECTRICS & POWER/CONTROL PANELS MISSING € 125.000 < click and then click again to enlarge All technical literature available 1550mm x .3-2.0mm stainless steel Rol...
Milan, Italy - Trusted Seller
1972 Redman Cut to length line 6-13 mm/ 600-2000 / 20 t
used
- Manufacturer: Redman
Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Dir...
Poland - Trusted Seller
F&P + Other 2000(2200)x5mm CTL Line UNUSED! #4904
new
- Manufacturer: F&P + Other
€ 485.000 WAS NEVER INSTALLED -- IT'S STILL PACKED > Built: 2005 STOP/START LINE -- ESPECIALLY SUITABLE FOR TANK MAKERS For material thicknesses from 1.5 to 5mm, Stainless steel 304/316 with resistance: 60 Kg/...
Thiene, Italy - Trusted Seller
Cut to length line Herr-Voss/Cincinnati 2400mm x 8mm x 25t (A3780)
used
- Manufacturer: Cincinnati
Used cut to length line Herr-Voss/Cincinnati 2400mm x8mm x 25t (a3780) for coil metal cross cutting into sheets of required lengths Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double M...
Poland - Trusted Seller
F&P 20mm M.S. CTL Lines (New) #0017.1
new
- Manufacturer: Floreani & Partners
Material: Hot rolled / Galvanized Material yeld point: 1.100 N/mm2 with th.<6 mm, 700 N/mm2 with th. 6mm<>12mm, 500 N/mm2 with th. over 12mm Material thickness: 2÷20mm Coil weight max.: 30.000kg Internal coil...
Thiene, Italy - Trusted Seller
F&P 2100mm x 20mm Cut To Length Line (New) #0017
new
- Manufacturer: Floreani & Partners
Material: Hot rolled / Galvanized Material yeld point: 1.100 N/mm2 with th.<6 mm, 700 N/mm2 with th. 6mm<>12mm, 500 N/mm2 with th. over 12mm Material thickness: 2÷20mm Coil weight max.: 30.000kg Internal coil...
Thiene, Italy - Trusted Seller
Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788)
used
- Manufacturer: Wean
Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788) for coil metal cutting into sheets of required sizes Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel M...
Poland - Trusted Seller
Cut-to-length line FIMI 2000x8mm x30t (A3769)
used
- Manufacturer: FIMI
Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to pr...
Poland - Trusted Seller
Cut-to-length line Bronx 2050x8mm x35t (A3781)
used
Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double St...
Poland - Trusted Seller
F&P 2200mm x .25-3.0mm Alu. CTL Line #0022
new
- Manufacturer: Floreani & Partners
Flying Shear Type 40m / minute 25ton coils (ID 500mm, max. OD 1950mm, minimum width 1000mm) Product: minimum size 500x500mm, maximum size 2200x4000mm; max. stack weight 5ton Yield strength: Max 300 N/mm2 Ope...
Thiene, Italy - Trusted Seller
72″ x .075″ x 40000Lb Rowe / Herr Voss CTL Line
used
- Manufacturer: Herr Voss
used cut to length line for sheet metal processing 72″ x .075″ x 40,000Lb Rowe / Herr Voss CTL Line Entry Coil Car Floor Standing V-Type Design Powered Lift & Traverse Control Panel Mandrel Uncoiler 4-Leaf Mandre...
- Trusted Seller
RIZZATO 650x2mm Cut To Length Line #0283
used
- Manufacturer: RIZZATO
€ 250.000 Roll feeder type Installed and in service Milan, Italy specially to make sheet metal blanks for appliances Safety guarding to CE Perfect condition 60m / minute Minimum material thickness: ...
Thiene, Italy - Trusted Seller
OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794)
used
OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm max...
Poland - Trusted Seller
F&P + OTHERS 2200mm x 12mm CTLL #0139
used
- Manufacturer: F&P + OTHERS
30m / minute flying shear type 3mm to 12mm material thickness the existing used equipment of our own manufacture, built in: 1996 (a) EXISTING USED LINE PARTS (currently still installed and demonstrable under...
Thiene, Italy - Trusted Seller
Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear)
used
Cut to length line LDM Spotti 1500x6x25t is used for sheet metal cutting up to 6mm metal thickness. CTL line is equipped with two levelers and flying shear LDM CUT TO LENGTH LINE 1500X6 YEAR OF CONSTRUCTION 2000 ...
Poland
Tip: Enter manufacturer, model or keyword
