Used Processing in Pennsylvania, USA

30,000 CFM TWIN CITY MODEL BCN-SW BLOWER

• Manufacturer: Twin City

Inventory id: 20027300000 | Capacity: 30,000 | Pressure: 70 | Air/material handling/dust: AIR | Wheel dia: 66 | Drive type (direct/belts pulleys): DIRECT | Motor hp: 500 | Motor rpm: 1785 | Motor volts: 2300/416...

96/107.5 MVA, 34,500 PRI, 510.7-912.3 SEC, ABB FURNACE TRANSFORMER

• Manufacturer: ABB

Inventory id: 20061900000 | Power rating: 96/107.5 | Primary voltage: 34,500 | Secondary voltage: 510.7 - 912.3 (18 TAPS) | Load tap changer: YES | Phase: 3 | Hertz: 60 | Age: 1984 | Impedance percentage: 2.6% /...

12" (305 MM) DIA. DEZURIK KNIFE GATE DUST COLLECTOR VALVE

• Manufacturer: DEZURIK/SARTELL

Inventory id: 10997800000 | Size diameter: 12 | Type valve (butterfly, mixer, gate, etc): KNIFE GATE | Application: DUST COLLECTOR | Total weight: 420 LBS

1983 150 HP, 1150 RPM, 250V, TOSHIBA, SA-2095-KCKM, SHUNT USED DC MOTOR

• Manufacturer: Toshiba
• Model: DC250

Inventory id: 10722100000 | Horsepower: 150 HP | Speed: 1150 RPM | Voltage: 250 VOLT | Frame: 2095-KCKM | Winding: SHUNT | Enclosure: BV | Shaft: SESS | Amperage: 499 | Bearings: A/F | Field voltage: 220 | Degre...

25" (635 MM) WIDE RAPISTAN BELT CONVEYOR

• Manufacturer: RAPISTAN

Inventory id: 20069200000 | Table width: 25" (2 X 10" BELTS | Roll face: 25" | Length: 9'-0 | Drive arrangement: MOTOR DRIVEN | Previous use: CLADDING LINE | Overall length: 112 | Overall width: 32 | Overall hei...

22" WIDE x 17´ LONG PRAB MAGNETIC CONVEYOR

• Manufacturer: PRAB

22" WIDE x 17´ LONG PRAB MAGNETIC CONVEYOR MODEL #: 3´ INFEED LENGTH 22" WIDE 17´ LONG 1.5 HP MOTOR

GENERAL PNEUMATICS REFRIGERATED COMPRESSES AIR DRYER

• Manufacturer: GENERAL PNEUMATICS

GENERAL PNEUMATICS REFRIGERATED COMPRESSES AIR DRYER Single Phase Price..FOB..Delta,Oh....

1990 BILLET SHOT BLASTER - BLASTEC, AUTOMATED SHOT BLASTER, BATCH SHOT BLASTER, MANUAL SHOT BLASTER

• Manufacturer: BLASTEC

Inventory id: 20041600000 | Product size: 3.5" TO 12" ROUND OR SQUARE | Number of heads: 4 | Blasting medium: S-330 OR S-390 STEEL SHOT | Speed: 35 LINEAR FEET PER MINUTE | Drive motor hp: 50 | Drive motor rpm: ...

115' 40" (1016 MM) FACE X 14" (356 MM) DIA., 12 SECTIONS/2 ROLLS PER SECTION ON 5' CENTERS, BIRDSBORO

• Manufacturer: BIRDSBORO

Inventory id: 11057300000 | Table width: 40 | Roll face: 40 | Roll diameter: 14 | Length: 115 | Roll spacing: 60 | Roll fabrication (solid, hollow): HOLLOW | Roll bearing type (roller, sleeve): ROLLER | Motor hp...

2017 19' INDIVIDUALLY DRIVEN ROLLER TABLES, 23-1/2" FACE X 9-1/2" DIA HOLLOW ROLLS

Inventory id: 20053700000 | Table width: 23.62 | Roll face: 23.62 | Roll diameter: 9.5 | Length: 18'-11" | Drive arrangement: INDIVIDUALLY MOTOR DRIVEN | Number of rolls: 3 | Roll spacing: 59 | Roll fabrication ...

1993 90 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, FLATS (NCO)

• Manufacturer: Simac

Inventory id: 20081402900 | Roll face: 31.5 | Roll diameter: 10.5 | Length: 90 FEET

70 TON PER HOUR BILLET REHEAT FURNACE

Inventory id: 20090300400 | Capacity (tph): 70 TON PER HOUR | Manufacture: SMS / MEER

2012 BILLET RECEIVING TABLE, USED TRANSFER BED FOR BILLETS, BLOOMS AND SLAB STEEL

• Manufacturer: SMS / MEER

Inventory id: 20090300100 | Table width: 40 FT WIDE | Length: 40 FT LONG | Total weight: EACH BILLET WEIGHS 4.274 LBS OR 2.137 TONS TOTAL WEIGHT OF 40 BILLETS IS 85.5 TONS | Previous use: BILLETS ARE REMOVED F...

2012 MUELLER AT40-F-20 HEAT EXCHANGER

• Manufacturer: Mueller

Inventory id: 20087800200 | Type or description: PLATE TYPE HEAT EXCHANGER | Previous use: WATER | Length: PACK LENGTH - 14.65" TO 13.76" | Weight: 2710 LBS

2017 EVOQUA MODEL 470G32-203MYLW "J-PRESS" FILTER PRESS

• Manufacturer: EVOQUA

Inventory id: 20088600000 | Type or description: FILTER PRESS | Capacity: 0.5-4 CUBIC FOOT DRY CAKE CAPACITY | Suction pressure: FEED PRESSURE - 225 PSI | Body material (steel, iron): COMPOSITE | Connections (sc...

Atlas-Copco ZT 90 Industrial Compressor

• Manufacturer: Atlas-Copco
• Model: ZT 90

Good condition Atlas-Copco ZT 90 Industrial Compressors manufactured in 2004. Located in France and other countries. Click request price for more information.