Machine Tools » Stamping Presses

Search By Manufacturer

Search By Country

Building Filters

974

Used Stamping Presses

  • no-image_en.png

    TOS SMERAL LENR 40

    • Manufacturer: Šmeral Brno
    • Model: LENR 40

    Mechanical Punch Press TOS SMERAL Mechanical Punch Press Brand TOS SMERAL Model LENR 40 Capacity 40tons Table 63cm x 43cm

    Guadalajara, Mexico
  • no-image_en.png

    KMC KD-200-1

    • Manufacturer: KMC

    Pneumatic Clutch Punch Press Brand KMC Model KD-200-1 Capacity 200 Tons Table Dimensions 2.50m x 1m Double Connecting Rod

    Guadalajara, Mexico
  • no-image_en.png

    Mechanical Punch 10 TON

      Mechanical Punch 10 TON Mechanical Punch Capacity 10 TON

      Guadalajara, Mexico
    • no-image_en.png

      SEYI MARK-66V

      • Manufacturer: SEYI

      Punching machine Brand SEYI Model MARK-66V Capacity 66 Tons Table dimensions 20" x 35"

      Guadalajara, Mexico
    • no-image_en.png

      SANGYONG C5-35

      • Manufacturer: SANGYONG

      Pneumatic Clutch Puncher Brand SANGYONG Model C5-35 Capacity 35 Ton Table 13" x 26" Rotate the car ear

      Guadalajara, Mexico
    • no-image_en.png

      SIMPAC C4-110

      • Manufacturer: SIMPAC

      Pneumatic Clutch Punch Tooling Brand SIMPAC Model C4-110 Capacity 110 Tons Work Table 27" x 43"

      Guadalajara, Mexico
    • MUHR & BENDER KLH 300/610

      MUHR & BENDER KLH 300/610

      • Manufacturer: MUHR & BENDER
      • Power requirement: 4 kW

      ** good condition (!!) ** with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material supp...

      Europe
    • PEDDINGHAUS HYDRAULIC 1001

      PEDDINGHAUS HYDRAULIC 1001

      • Manufacturer: Peddinghaus
      • Model: 1001
      • Power requirement: 7.5 kW

      ** maintained condition (!!) ** New price without accessories approx. 25.000 euros ** Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with ...

      Europe
    • Electro.-Pneum. Hot stamping press Gierlich

      Electro.-Pneum. Hot stamping press Gierlich PE600 with round table, 6 stations

      • Manufacturer: Gierlich

      6-station round table, 700 x 700 mm foil feed with spooling attachment workpiece counter hand- or automatic operation 4 circuit plans If the year of construction is marked “*”, it is the information the prior own...

      $2,876 USD
      Sprockhövel, Germany
    • Hydraulic stamping, straightening,- bending press

      Hydraulic stamping, straightening,- bending press

      • Manufacturer: Schloemann

      Nominal force: 1200 t Distance between columns in light: - by width: ...

      Germany
    • STAMPING PRESS, USSR, 1600 t.,

      STAMPING PRESS, USSR, 1600 t., P236, ID. A1168

      • Manufacturer: USSR

      Soviet Union P236, 1600 t. capacity used machine Capacity, tons: 1600 Nominal force exhaust traverse, tons: 1 step pressure: 500 2 step pressure: 1000 3 step pressure: 1600 Rated force of clamping traverse...

      Germany
    • Mechanical Stamping,- Trimming Press, Erfurt,

      Mechanical Stamping,- Trimming Press, Erfurt, 1250 t., type PKZZ 1250, ID.A1688

      • Manufacturer: Erfurt
      • Model: PKZZ I

      Capacity, max: 1250 ton Ram stroke: 630 mm Ram stroke per minute: 11 Shut height: 1165 mm Ram ajustment: 630 mm Bed: 4000 ...

      Germany
    • STAMPING PRESS, ERFURT, 500 t.,

      STAMPING PRESS, ERFURT, 500 t., type PKZZ 500, ID. A1569

      • Manufacturer: Erfurt
      • Model: PKZZ

      Capacity: 500 ton. Ram stroke. 500 mm. Ram stroke per Min.: 20 Ram ajustment: 500 mm. Shuth height: 1100 mm. Bed: 2800 x 1800 mm....

      Germany
    • Mechanical Stamping,- Trimming Press, Erfurt,

      Mechanical Stamping,- Trimming Press, Erfurt, 1250 t., type PKZV 1250 FS, ID.A1643

      • Manufacturer: Erfurt

      Press with front moving bed Number of Connecting points of the ram: 4 Max. ranm force: 1250 tons Slide stroke: ...

      Germany
    • STAMPING PRESS, ERFURT, 315 t.,

      STAMPING PRESS, ERFURT, 315 t., type PKZZ III 315.1 FS, ID. A1490

      • Manufacturer: Erfurt
      • Model: PKZZ III

      Capacity: 315 ton. Ram stroke. 400 mm. Ram stroke per Min.: 25 Ram ajustment: 400 mm. Shuth height: 750 mm. Bed: ...

      Germany
    4546474849

    Overview

    Stamping presses are essential for manufacturing operations, designed to shape or cut metal and other materials using a die. They are widely used in various industries, including automotive, aerospace, and appliance manufacturing, to produce components with high precision and efficiency. Stamping presses come in different types, such as mechanical, hydraulic, and servo-driven, each offering unique advantages depending on the production needs.

    FAQ

    What factors should I consider when buying a used stamping press?

    Consider the press's tonnage capacity, die space, stroke length, and overall condition. Check for any signs of wear or damage and review the maintenance history.

    How can I ensure safe shipping of a stamping press?

    Hire a professional machinery mover with experience in transporting heavy equipment. Ensure the press is properly secured and protected during transit to prevent any damage.

    What are the maintenance requirements for a stamping press?

    Regular maintenance includes checking and lubricating moving parts, inspecting dies and tooling, and ensuring electrical and hydraulic systems are functioning correctly. Follow the manufacturer's maintenance schedule for specific guidelines.