Used machine tools in Canada

WASHER ASSEMBLY MACHINES

• Manufacturer: WASHER ASSEMBLY MACHINES

• Self-Drilling/Tapping Screw/Bolt/Nail Washer Assembly machines •Self - Drilling / Tapping Screw & Washer Assembly Machine (ZYB) •Long Self - Drilling / Tapping Screw & Bonded / BAZ Umbrella Washer Assembly Mach...

WASHER ASSEMBLY MACHINES

• Manufacturer: WASHER ASSEMBLY MACHINES

•Other Fastener Assembly machines •High Speed Cable Clip & Nail Assembly Machine (ZYJN) •Stainless Steel Cap & Self - Drilling / Tapping Screw Assembly Machine (ZYK) •Stainless Steel Cap & Long Self - Drilling / ...

Thread Rolling Machines BBW

• Manufacturer: Thread Rolling Machines

Long Parts Thread Rolling Machine * Thread rolling unit with threading dies for: WF # 40 or WF # 50 / TR 6 or TR 7 * Up to 40 full threads per minute * Solid O-frame designed for * axial loads of up to 100 t acti...

Screw & Bolt Making Machine BM

• Manufacturer: Walden Machinery 2

Modular Long Stroke Screw & Bolt Making Machine These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized compon...

Spoke Machine SPM II / SPM III

• Manufacturer: Spoke Machine

Automatic Spoke Machine * 1 Model: Size Range: Up to 5mm These machines are for the manufacture of cycle spokes, fully automatic from wire coil to finished product. ■ Infinitely variable drive, incl. frequency co...

Model HK-3 (3Ton) Two Die Cylindrical Thread Rolling Machine

Model HK-3 (3Ton) Two Die Cylindrical Thread Rolling Machine > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Sp...

Oster 784 Pipe and Bolt Threader up to 4″

"Normal wear from use." Oster Threader 4'' Model 784 RE121 Only $4,899 USD! Excluding shipping. Sold as is, but warranted in good condition. We're quite friendly and It's much faster than back and forth messages ...

6 in. Oster Pipe and Bolt Threader, Model 716

6 inch "Oster" pipe and bolt threader, Model 716 Model (Cat. No.) 716 Headstock mounted push button control Heavy duty three phase motor, It's now in our heated warehouse, and can be shipped on two days notice. I...

Oster 716 Pipe and Bolt Threader 6″ model LE31

"Normal wear from use." Oster 716 LE31 Pipe and Bolt Threader 6″ capacity. Only $6,899.00 USD! Excluding shipping. Sold as is, but warranted in good condition. We're quite friendly and It's much faster than back ...

1986 EW Menn RW10

• Manufacturer: EWMenn

NAIL THREAD ROLLER * Vibratory Bowl Capacity: 5/16"X3-1/8" | Nail diameter range: 2.5 - 8.0 mm | Thread length: up to 80mm | Nail length: up to 160mm | Maximum production: Up to 1000 PPM

UNIVERSAL AS

• Manufacturer: UNIVERSAL

HORIZONTAL SINGLE HEAD DRILLING/TAPPING MACHINE * 17" Vibratory Bowl Feeder * Air Clamping * Coolant Pump and Tank

UBT SERIES

MAGAZINE FEED U-BOLT BENDING MACHINES Die range: M6 - M24 | Part lengths: 80 -1000mm | Internal ubolt width: 20-250mm | Production speed: up to 50ppm

1999 FK (Fwu Kuang) FN32B

• Manufacturer: FK (Fwu Kuang)

FOUR SPINDLE NUT TAPPING MACHINE * Tooling for 5/8”, 3/4” hex and extra height nuts * Tooling for 5/8” flange * Operator manual

Sacma SR4

• Manufacturer: Sacma
• Threading length: 95 millimeter

PLANETARY THREAD ROLLING MACHINE * Chain Elevator feeder * Many tools

1976 NUTAP MAS-14

• Manufacturer: Nutap
• Model: MAS-14

NUT TAPPING MACHINE * Vibratory Bowl * Tooled for M6x1 Special Flange Nut with taper end