- Trusted Seller
Sterling Mini Poly 6″ x 6″ Barrel B2159
used
- Manufacturer: Sterling
Model: 66 Sterling Mini Poly 6″ x 6″ Barrel B2159 Weight: 20 lbs | On-hand: 2 | Inside dimentions: 6" x 6"
$550 USDSparta, MI - Trusted Seller
STERLING 4.5 " EXTRUDER 32.1 VENTED BARREL 200HP DC
used
- Manufacturer: Sterling
- Model: 45
108976 One (1) used Sterling 4.5" extruder, 32.1 vented barrel, (8) heater zones, screw and barrel in good condition , Nordson EH 45 screen changer, 200HP DC motor with gear box, Drive cabinet with cooler. ( no P...
Greenville, SC - Trusted Seller
STERLING 7.5 Ton Air Cooled Portable Chiller SMCA 7.5 USED
used
- Manufacturer: Sterling
Air Cooled 7.5 HP Compressor 1 HP Process Pump 1 HP Fan R-22 Refrigerant @ 10 lbs 30°F Minimum Temperature 65°F Maximum Temperature Chilled Water Tank 460 Volt 3 Phase 60 Hz 19.0 F.L. Amps Tested Good...
- Trusted Seller
Sterling 5 Cu’ Electric/Hydraulic Filter Press FP2602
used
- Manufacturer: Sterling
Control Panel with PLC, and Hydraulic Unit. Sterling 5 Cu’ Electric/Hydraulic Filter Press FP2602
- Trusted Seller
2007 Sterling SMCA 7.5
used
- Manufacturer: Sterling
7.5 ton Air Cooled Chiller Used Sterling SMCA 7.5 Temperature Control Equipments for sale. This pre-owned machine is available all over the US
Sterling, MA - Trusted Seller
2007 Putzmeister TB-110 Telebelt Conveyor On 2007 Sterling C13 Truck
used
- Manufacturer: Sterling
2007 Putzmeister TB-110 Concrete Conveyor On 2007 Sterling C13 8x4 Truck, Rebuilt Engine 2021, Belts 70%-80%, Both Remotes
Illinois, USA - Trusted Seller
Sterling RA-GM207 Gear Drive #33417
used
- Manufacturer: Sterling
Sterling Gear Drive, Sterling Gear Box Model Ra-gm207, Ratio 100/1, Frame Ragm207, Input Rpm 1750, With Sterling 1/2 Hp AC Motor, 460 Volt, 1750 Rpm, 56c Frame, Unused Storeroom Spare
Fitchburg, MA - Trusted Seller
180 Ton Sterling 25 lbs. Dual Head SE-425D Blow Molder (1994)
used
- Manufacturer: Sterling
Number of heads: 2 | Shot size capacity (lbs): 25 | Head center spacing (in): 36 | Head tooling sizes (min/max): 3" / 14" | Min. shot height (in): 10 | Max daylight (in): 66 | Clamp tonnage: 180 | Extruder scre...
Ripley, MS - Trusted Seller
15" SterlTech Screen, Model TM40LS, S/S
used
- Manufacturer: Sterling
15" SterlTech Screen, Model TM40LS, S/S Used 15" Sterltech screen, model TM-40-LS, stainless steel construction, single deck, on base with cover, 230 volt, serial# 1518-8614522.
Cleveland, OH - Trusted Seller
20 HP Sterling Direct Drive Blower
used
- Manufacturer: Sterling
20 HP Sterling Direct Drive Blower 8" Inlet/Outlet 20 Baldor Motor, 3540 RPM, 230/460 Model 724-20FD, S/N 66946 13B
United States - Trusted Seller
30 Hp Sterling Blower Cyclone System
used
- Manufacturer: Sterling
Unused 30 Hp Sterling Blower Cyclone System Model 1530 FV Blower, 1-A Setup 72" Diameter Cyclone Filter Head, With Stand 2 Hp Airlock, Model RV12-6, S/n B14617 Blower Skid 70" x 53" x 67" 1,418lbs Cyclone Skid 14...
United States - Trusted Seller
30 Hp Sterling 1530 FV Blower, 1-A Setup
used
- Manufacturer: Sterling
- HP: SF V6205710005
Used 30 Hp Sterling 1530 FV Blower, 1-A Setup 16" Inlet/Outlet Diameter 230V/460V - 68.3A/34.3A 286T Frame RPM 1770 New in 2020
United States - Trusted Seller
5 HP Sterling Blower & Cyclone System, With Stand And Filter Head
used
- Manufacturer: Sterling
- HP: F1808022489
5 HP Sterling 6005FV Blower 230-460/3/60, 11.8-5.9A 3450 RPM, 184T Frame, TEFC V-Belt Drive, Heavy Duty Pillow Block Bearings, Carbon Steel, Aluminum Impeller 6” OD Inlet and Outlet CCW Discharge Belt & Shaft Gua...
United States 
EXTRUDER, 6'', 1-SCREW, 24-1LD, STERLING, 6'', ELECTRIC, 6 ZONES, 300HP
used
- Manufacturer: Sterling
EXTRUDER, 6'', 1-SCREW, 24-1LD, STERLING, 6'', ELECTRIC, 6 ZONES, 300HP
Alvin, TX
EXTRUDER, 8'', 1-SCREW, 32-1L/D, STERLING, 8'', ELECTRIC, 6 ZONES, 500HP
used
- Manufacturer: Sterling
EXTRUDER, 8'', 1-SCREW, 32-1L/D, STERLING, 8'', ELECTRIC, 6 ZONES, 500HP. Unitized On Base.
Alvin, TX
Tip: Enter manufacturer, model or keyword