Category

Used Sumitomo Processing

- 37 listings found
Sort by Price: Low to High | High to Low
  • SUMITOMO VJ617AX 77483

    • Manufacturer: Sumitomo

      Output torque 105000 in-lb; hp: 1.66 | qty: 1 | v/h: v | ratio: 2065.10 | remarks: 1 s.f. | input rpm: 1750 | output rpm: 0 | driving no.: none

      No price
      La Porte, TX, USA
    • SUMITOMO VBM-8-58 73596

      • Manufacturer: Sumitomo

        Vertical in-line; no shaft or blades; hp: 0.00 | qty: 1 | alloy: c | ratio: 35.00 | remarks: 5.5 kw | voltage: 460 | material: cs | input rpm: 0 | blade type: no blades | driver rpm: 1760 | output rpm: 0 | shaft ...

        No price
        La Porte, TX, USA
      • (2003) Sumitomo 125 Ton SG125M-HP-1 High Speed injection machine

        • Manufacturer: Sumitomo

          Eti#5357(2003) sumitomo 125 ton  sg125m-hp-1 high speed injection machinebrand: sumitomomodel: sg125m-hp-1injection unit: c360myear: 2003low hours: 5371specifications:tonnage: ...................... 125 tonshot s...

          $32,000 (USD)
          Miami, FL, USA
        • 2005 Sumitomo - SE100D-C250M (2005) - 110 Ton, 4.8 oz. SUMITOMO All-Electric Injection Molding Machine

          • Manufacturer: Sumitomo
          • Screw Diameter: 36mm

          type: all-electric | control: n8 | tonnage: 110 us | voltage: 230/3/60 | shot size: 4.8 oz. | platen size: 25.59'' x 23.62'' | max daylight: 29.92'' | ejector stroke: 3.94'' | opening stroke: 13.78'' | screw dia...

          No price
          Worcester, MA, USA
        • 220 Ton Sumitomo Injection Molding Machine, Model SH220C, 26 Oz, Made New In 1999

          • Manufacturer: Sumitomo

            Used 220 ton sumitomo injection molding machine, model sh220c, 26 oz, made new in 1999 clamp force: 220 ton shot size: 26 oz platen size: 35.04" x 33.07" tie bar spacing: 24.02" x 22.05" open stroke: 20.08" eject...

            No price
            United States
          • 2000 Sumitomo - SG100M-HP (2000) - 100 Ton, 2.23 oz. SUMITOMO Injection Molding Machine

            • Manufacturer: Sumitomo

              options: high pressure injection unit, air blow, core pull | tonnage: 100 | voltage: 460/3/60 | shot size: 2.23 oz. | platen size: 24.01" x 24.01" | screw stroke: 4" | ejector stroke: 3.94" | opening stroke: 16....

              No price
              Worcester, MA, USA
            • Sumitomo Heavy Industries Injection Molding Machine SD30

              • Manufacturer: Sumitomo

                Sumitomo heavy industries sd30 netstal injection molding machine yushin drdii-hs robot arm power rating: 460 vac, 35 amps, phase-3, 60 hz heater: 4.8 kw motor: 15 kw wiring diagram: m391370 this item will require...

                $8,000 (USD)
                Ventura, CA, USA
              • Sumitomo Heavy Industries Injection Molding Machine - AS-IS SD30

                • Manufacturer: Sumitomo

                  Sumitomo heavy industries sd30 injection molding machine - **as-is** this unit has received some physical damage, please refer to photos or contact us for more information. yushin drdii-hs robot arm power rating:...

                  $6,000 (USD)
                  Ventura, CA, USA
                • 350 Ton Sumitomo Injection Molding Machine, Model SH350A, 38.3 Oz, New In 1997

                  • Manufacturer: Sumitomo

                    Used 350 ton sumitomo injection molding machine, model sh350a, 38.3 oz, new in 1997 clamp force: 350 ton shot size: 38.3 oz platen size: 40.55" x 40.55" tie bar spacing: 27.95" x 27.95" daylight: 49.6" controller...

                    No price
                    United States
                  • (2013) Sumitomo 180 Ton SE180-EV All Electric Injection Machine

                    • Manufacturer: Sumitomo

                      Eti#5361(2013) sumitomo 180 ton se180-ev all electric injection machinebrand: sumitomomodel: se180-ev-c560 all electricyear: 2013b screwhour: 344 ( almost new) only test runprice exworks singapore, asia .... 105,...

                      $105,000 (USD)
                      Miami, FL, USA