Rohde & Schwarz ESR26
used
- Manufacturer: Rohde & Schwarz
- Model: ESR
Rohde & Schwarz ESR26 Details Rohde & Schwarz ESR26 The R&S ESR is an EMI test receiver for the frequency range from 10 Hz to 26.5 GHz and complies with the CISPR 16-1-1 standard. It measures electromagnetic dist...
Lake Mary, FLRohde & Schwarz ESIB7
used
- Manufacturer: Rohde & Schwarz
- Model: ESIB7
Rohde & Schwarz ESIB7 Details Rohde & Schwarz ESIB7 20 Hz to 7 GHz EMI Test Receiver Each R&S ESIB combines the high sensitivity, large dynamic range and selectivity of a high-end EMI test receiver with the flexi...
Lake Mary, FLRohde & Schwarz ESU
used
- Manufacturer: Rohde & Schwarz
- Model: ESU
Rohde & Schwarz ESU Details Rohde & Schwarz ESU The R&S ESU is a new family of CISPR16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic interference measurements. Th...
Lake Mary, FLAnritsu ML428B
used
- Manufacturer: Anritsu
- Model: ML428B
Anritsu ML428B Details Anritsu ML428B The Anritsu ML428B not only enables measurement of the field strength of general broadcasts and radio communications, but it can also perform measurements of interference wav...
Lake Mary, FLRohde & Schwarz ESVD
used
- Manufacturer: Rohde & Schwarz
- Model: ESVD
Rohde & Schwarz ESVD Details Rohde & Schwarz ESVD Rohde & Schwarz ESVD EMI Test Receiver, 20 MHz - 1 GHz (2 GHz) The R&S ESVD Test Receiver is equally suitable for the measurement of signal strength and interfere...
Lake Mary, FLRohde & Schwarz ESL3
used
- Manufacturer: Rohde & Schwarz
- Model: ESL
Rohde & Schwarz ESL3 Details Rohde & Schwarz ESL3 9kHz To 3GHz EMI Test Receiver The R&S ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the latest standards a...
Lake Mary, FLRohde & Schwarz ESI26
used
- Manufacturer: Rohde & Schwarz
- Model: ESI26
This EMI test receivers combines the flexibility and speed of spectrum analyzers with the large dynamic range required for EMI measurements in conformance with standards. ESI carries out measurements in conforman...
Webster, MARohde & Schwarz ESVS-30
used
- Manufacturer: Rohde & Schwarz
- Model: ESVS
Form Factor Benchtop Test Standard(s) ANSI,C63.4,EN,CISPR,VDE0876 Minimum Frequency 20 MHz Maximum Frequency 1 GHz Input Impedance 50 Ohm Frequency Accuracy 0.000000000000003 % Minimum Sweep Time 50 ms Ma...
Webster, MATBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025
new
- Manufacturer: LiSN
The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...
Midrand, South AfricaRohde & Schwarz ESPI
used
- Manufacturer: Rohde & Schwarz
- Model: ESPI
B2 The R&S ESPI EMI test receivers are especially designed to meet all EMC testing demands during product development and for EMC precertification. Equipped with the preselector/preamplifier option (R&S ESPI-B2),...
Darmstadt, GermanyTBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F
new
- Manufacturer: LiSN
The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...
Midrand, South AfricaSCHWARZBECK NSLK 8127
new
- Manufacturer: SCHWARZBECK
Single-phase LISN network 2 x 16 A, 10 kHz to 30 MHz. Frequency range: 10 kHz to 30 MHz AMN impedance: (50 µH + 5 ?) || 50 ? Pre-filter choke: 250 µH Maximum continuous current: 2 x 16 A Maximum voltage: - 250 V ...
Rivalta di Torino, ItalyTBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...
Midrand, South AfricaTBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...
Midrand, South AfricaTBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...
Midrand, South Africa