Used Automatic Lathes in Japan

B0125C/B0126C

Compact type with reduced depth is added to the B012 series Rear spindle and turret allow overlap machining of front and rear surfaces. Compact design with minimal overhang. Depth is reduced by 39% compared to co...

B0123C

Compact type with reduced depth is added to the B012 series lineup Compact design with minimal overhang. Depth is reduced by 39% compared to conventional models. Maximum rotational speed of 8,000 min -1 The front...

B073-VR/B075-VR

Ideal for machining high-precision micro parts such as communication connectors and clock parts Instead of a toggle, Tsugami's original chuck opening/closing mechanism with superior response and balance character...

B0123-VR/B0203-VR

High-precision machining with a structure that is faithful to the basics Basic machine with small investment and large profit ●High output built-in motor is used for the main spindle to enhance machining capacity...

C200 Machinery

Compact specifications for high-precision finishing machine Highly rigid sliding guideway on the X-axis absorbs heavy cutting loads and ensures stable machining accuracy. Pre-tensioned ball screw suppresses therm...

B073C/B075C

Compact type with reduced depth is added to the B07 series lineup Compact design with minimal overhang. Depth reduced by 39% compared to conventional models. Instead of a toggle mechanism, Tsugami's unique chuck ...

B0125-VR/B0205-VR/B0126-VR/B0206-VR

Rear spindle and rear turret enable overlap machining Compact machine equipped with a rear turret with Y-axis Improved multi-tasking capability on the back side (B0126-VR/B0206-VR) High power built-in motors are ...

P036W/P056W

Highly Acclaimed High Precision Machining Machine for Micro Precision Parts Independent opposed turret specification of the P0 series ●Machining time is shortened by the high-speed spindle and optimum cutting spe...

2006 HOWA OHKUMA 2SP-10HG

• Manufacturer: Okuma
• Model: 2SP-10HG

Distance between both spindles: 310mm,. Max. machining: ø100*100mm, Main spindle through-hole diameter: φ52mm 50～5000rpm, S:(X)150*(Z)175mm In case of any discrepancy between the description and the actual produc...

2017 DMG Mori Seiki AA-1

• Manufacturer: DMG Mori

Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...

2017 DMG Mori Seiki AA-1

• Manufacturer: DMG Mori

Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...

1998 Takizawa Ironworks TAC510×1000

• Manufacturer: Takizawa Iron Works

FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...

2002 Techno Washino C3

• Manufacturer: Washino
• Model: C3

FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...

2014 Takamatsu XW130

• Manufacturer: Takamatsu

FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...

2007 Techno Washino G06

• Manufacturer: Washino

Control: FANUC 0i-TB. Swing: Φ285,. Standard workpiece: Φ60×60,. Spindle speed: 6,000rpm, Travel: (X)300(Z)285㎜, Tool post: comb type, Standard workpiece: Φ60×60, Spindle speed: 6,000rpm, Tool post: comb type, St...