- Trusted Seller
Dosing screw Ø 100mm
used
External dimensions: Läge: ±3500mm; Breite: ± 300mm drive over gearmotor and chain.
Amel, Belgium - Trusted Seller
Core shooter LAEMPE L10 cold-box
used
- Manufacturer: Laempe / Röperwerk
Dimensions: Length: 2800mm; Width: 2300mm; Hight: 2040mm vacuum-clamping plats 410×200mm, with gazing plate, core extraction slide cabine, hydraulic unit and vacuum pumps, control board
Amel, Belgium - Trusted Seller
Profil and formbandpapering machine HS
used
- Manufacturer: Bauknecht; 1,1KW; 500V 1420U/min
Dimensions: Width: 540mm; depth: 1200mm; height: 1530mm Motor: With pivoting table 730×500 mm for minimum 20° up to 50°, outreach 600mm
Amel, Belgium - Trusted Seller
Core sand mixer V+S IGF 50L
used
- Manufacturer: Vogel und Schemman
Dimensions: Höhe: 1280mm Usable dimensions : Depth: Ø530mm Motor: Brand: Bauer; Type: gear box; 2,2KW, V200/380, 39,5t/min contenance 50L; 50 up to 75 kg sand Output 750 up to 1000kg/h With emergence cover with ...
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
Sandlabo sand compactability tester GF/PVG
used
- Manufacturer: GF
Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with somples sleeve Ø 50mm H120 mm
Amel, Belgium - Trusted Seller
Belt convoyor with sand arerator 3,56m×0,5m
used
External dimensions: Lenght: 3800mm; Width: 1050mm; Height: 560mm Used dimensions: Lenght 3560mm; Width: 500mm Motor: 1,1KW, 220/380V, 125r/min Chain drive, motor sand acrator 0,5 PS; 380V; 71,4 r/min
Amel, Belgium - Trusted Seller
Band sander REMA vertical and horizontal
used
- Manufacturer: Merz
Motor: 1,8-2,2 kW, 380 V, n° 091670; 1450/2900 rpm, type FDR90L IP44 T-notch table with 2 speeds with dust collector in the base
Amel, Belgium - Trusted Seller
Thickness gauge ELCOMETER
used
With box (microns) Weight: ± 3 kg | Dimensions: length 160 mm, largeur 85 mm, height 40 mm | Motor: 3 V, 2 batteries 1AA | Measuring gauge: 1 to 1250 µm
Amel, Belgium - Trusted Seller
Pneumatic central board for OSBORN 716
used
- Manufacturer: ARCO JOUCOMATIC
Control board for the pneumatics of moulding machine OSBORN 716 With pneumatic plan
Amel, Belgium - Trusted Seller
1992 Vibrating conveyor 1600mm x 590mm
used
- Manufacturer: ZIPPE
External dimensions: length 1650mm, width 960mm, height ± 800mm Motor: 2x 0,81 kW, 230/400 V, brand AEG, type vibrating motor, 1410 rpm, serial number 96005867 On 4 rubber springs
Amel, Belgium - Trusted Seller
Vibrating conveyor KÜTTNER 4000mm x 800mm
used
- Manufacturer: Küttner
External dimensions: length 4150mm, width 1940mm, height 1500mm Motor: 2x 1,7 kW, 230/400 V, brand CYRUS, type vibrating motor, 980 rpm With base construction and releability ripcord
Amel, Belgium - Trusted Seller
Screw mixer AXMANN 5 t/h
used
- Manufacturer: Axmann
External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...
Amel, Belgium - Trusted Seller
2013 Pneumatic sand feeder KLEIN 75 l CE
used
Max. pressure 7 bar With pneumatic cone fastener Inlet Ø 100mm Outlet Ø 70mm With CE n° 0045
Amel, Belgium - Trusted Seller
1998 Gassing unit coldbox LÜBER LW-FDA-825i
used
- Manufacturer: Lüber
- Model: LW-FDA 825
Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...
Amel, Belgium
Tip: Enter manufacturer, model or keyword
