Used Foundry & Casting in Wallonia, Belgium

Trusted Seller
Fish mouth activated with pneumatic piston
- used
Fish mouth activated with pneumatic piston In working condition
Amel, Belgium
Trusted Seller
Angle grinder on foot HITACHI
- used
- Manufacturer: Hitachi
Type: G239F, Serial number : D 060203 In very good condition For discs of Ø 230 mm, 6600 rpm, 80 m/s
Amel, Belgium
Trusted Seller
BOSCH straight grinder HGS77/50 0602211010, 200V, 300 Hz, second-hand
- used
- Manufacturer: Bosch
HGS77/50 0602211010 1450 W, 18000 rpm 091102
Amel, Belgium
Trusted Seller
2005 Automatic pouring installation
- used
Construction year: 2005, weight: 10000 kg Automatic pouring installation with central bottom pouring ladle and 2 loading ladles Plug supervision SELCOM and PLC Siemens Automatic metal loading by 2 ladles on hydra...
Amel, Belgium
Trusted Seller
Core shooter RÖPER H25/2E
- used
- Manufacturer: Laempe / Röperwerk
Type: H25/2E, Serial number : 2110068 Year of construction: 1975, Weight : 2800 kg In good condition
Amel, Belgium
Trusted Seller
Twin shake-out 2 p. 4 x 2,5m
- used
- Manufacturer: Küttner
2 motors SCHORCH, type: KA7280MCB018Z, 55 kW, 985 rpm, 500 V Twin shake-out grid with two times 2 out-of-balance axles and 2 motors
Amel, Belgium
Trusted Seller
Hydraulic core shooter, VOGEL & SCHEMMANN, 10 l
- used
- Manufacturer: Vogel
Type: KSM61000-CO2, serial number: 4396, Com. number: 19.355Year of construction: 1991 Control PLC Siemens S5 With cabin and gassing unit Hydraulic movement With hydraulic unit With vacuum clamping The machine ca...
Amel, Belgium
Trusted Seller
Coreshooter PETERLE, cold box 18 l
- used
- Manufacturer: Peterle
Type: Cold matic L18, serial number: 1166 Belt automate Corebox dimensions: 600 mm x 200-600 mm, h. 400 mm- Joint vertical, max opening 840 mm With PLC SIEMENS S5-115U and OP27 With central lubrification With c...
Amel, Belgium
Trusted Seller
Vibrating crusher VIBRA MILL, ± 20 t/h
- used
Brand: GENERAL KINEMATICS, type: VM 160 VIBRA MILL Slots 90 mm x 15mm, after mesh 3 mm With 3 vibrating motors VIB TEC 2 x 11 kW; 380 V and 1 x 5,5 kW; 380 V On for 4 springs, outside Ø 240 mm
Amel, Belgium
Trusted Seller
Shakeout drum UNIVERSAL length 7,5m, Ø 950mm
- used
Toothed Shake out with antiwear lining (hard steel) Hools Ø +- 17 mm./ distance +- 30 mm. Drain in the middle under the drum On 4 rolls Ø 360mm, width 80mm Speed can be tune-up
Amel, Belgium
Trusted Seller
Shell moulding machine SHALCO U360
- used
Electric heated Heating plates 1100 mm x 1000 mm With electric panel (relay circuit)
Amel, Belgium
Trusted Seller
1978 Cutt-off machine, Ø 600 mm, UNIVERSAL
- used
Construction year: 1978, weight: 2700 kg Overal dimensions: 2200 mm x 1485 mm , h. 2130 mm2 motors: 2.2 et 5.5 kW, 380/660 V For disc Ø 600 mm, peripheral speed 100 m/s max, spindle Ø 40 mm With ring 60 mm Only w...
Amel, Belgium
Trusted Seller
Moulding machine OSBORN, type 722 RF
- used
- Manufacturer: Osborn
Machine jolts under pressing Head opens to the left
Amel, Belgium
Trusted Seller
Core shooter RÖPER H25
- used
- Manufacturer: Laempe / Röperwerk
Type: H25, Serial number: 36, Weight: 2805 kg Goose neck model machine completely modified on hydraulics Automat programmable With cabin weight 2805
Amel, Belgium
Trusted Seller
Core shooter RÖPER H12 / SODIMM
- used
- Manufacturer: Laempe / Röperwerk
Transformed by SODIMM, electric control TELEMECANIQUE TSX Micro and LAUER display Cold Box, with securisated cabinet, complete hydraulic, core box 500x500x400mm
Amel, Belgium