Used Foundry & Casting in Wallonia, Belgium

Trusted Seller
1997 Permanent overband magnet GOUDSMIT width 985mm
- used
- Manufacturer: Goudsmit
Dimensions: Length: 2200mm; Width: 1600mm; Height: 650mm Useful dimensions: Width: 985mm
Amel, Belgium
Trusted Seller
2023 Core shooter hotbox BIANCHI HBS 6.0, 6l
- used
- Manufacturer: Bianchi
Warranty period until July 2024 External dimensions: Length: 3800mm; Width: 1700mm; Height: 2550mm With control unit SIEMENS S7 Core box dimensions: length: 650m; width: 370mm; height: 400mm Heating plates dimens...
Amel, Belgium
Trusted Seller
2001 Core sand mixing plant LAEMPE SM5; 5,5t/h
- used
- Manufacturer: Laempe / Röperwerk
Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...
Amel, Belgium
Trusted Seller
NEW gassing units LÜBER, type LW-FDA 825i
- used
- Manufacturer: Lüber
- Model: LW-FDA 825
Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...
Amel, Belgium
Trusted Seller
Core sand mixer 120l
- used
Dimensions: Length: 750mm; Width: 800mm; Height: 1350mm Internal dimensions: Ø620mm; depth: 470mm With pneumatic outlet flap Without protective grid on the mixing bucket With on/off switch
Amel, Belgium
Trusted Seller
Core shooter RÖPER H25 completely hydraulic
- used
- Manufacturer: Laempe / Röperwerk
Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...
Amel, Belgium
Trusted Seller
Moulding machine OSBORN 719RF
- used
- Manufacturer: OSBORN
Type 719RF max width 950mm, clamping stroke 183mm demoulding stroke 330 ;
Amel, Belgium
Trusted Seller
$Refractory sprayer VELCO-ROTAMAT$
Refractory sprayer VELCO-ROTAMAT
- used
- Manufacturer: Velco Rotamat
Gear motor 4kW; 5,5PS; 50Hz; 8,6A; 380V Water inlet 1" 1/4 - without hose, flow rate 1.1 m³/h With hose ±4m With compressed air supply hose With vibrator on funnel
Amel, Belgium
Trusted Seller
Teapot ladle 2t SENSENBRENNER
- used
- Manufacturer: Senssenbrenner
Dimensions: Length: 1550mm; Width: 1600mm; Height: 1800mm Effective dimensions: Ø850mm; Depth: 860mm With planetary gear With teapot spout With crane eye With heat protection
Amel, Belgium
Trusted Seller
Manipulator Mecana
- used
- Manufacturer: Mecana CH.
Dimensions: length: 1000mm; width: 1200mm; height: 1200mm 230V 380 V., three phase Rotatable on 2 axes (vertical and 45°) With 2 pedals
Amel, Belgium
Trusted Seller
Pneumatic Hammer CLANSMAN CC100
- used
- Manufacturer: CLANSMAN DYNAMICS
Air capacity, 40 l / 6 bar / shot Year: 2004 | Weight: 400 kg | Dimensions: length 1300mm, width 700mm, height 1000mm
Amel, Belgium
Trusted Seller
2010 Manipulator CLANSMAN C2010 E5
- used
Dimensions: length ± 4500mm, width ± 2300mm, height ± 3800mm With pincer, opening 50mm ) 650mm
Amel, Belgium
Trusted Seller
Moudling box, 3000mm x 3000mm x h. 400mm
- used
With 4 crane eyes Weight: 1540kg
Amel, Belgium
Trusted Seller
Moulding box, 3500mm x 3500mm x h. 1000mm, 7020 kg
- used
With crane eyes Moulding boxes divided into 2/screwed together
Amel, Belgium
Trusted Seller
Moulding box, 2500mm x 2500mm x h. 800mm, 2350 kg/pc.
- used
With 4 crane eyes
Amel, Belgium