Used Tanks & Kettles in Bremen, Germany

420 liter pressure tank, Aisi 316

• Manufacturer: Metkon AG

max. allowable working temperature: 50 °C remarks: 4 support brackets, st. st.; Hand hole diameter approx. 210 mm

1200 liter pressure tank, Aisi 316

• Manufacturer: Möschle

max. allowable working temperature: 135 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents,statics,CE label and declaration of conformity,operation manual remarks: Manhole ...

1330 liter pressure tank, Aisi 316

max. allowable working temperature: 150 °C remarks: Manhole diameter 350 mm; 2 support brackets, Aisi 316; 1 connection in the cylinder bent; Connections upper bottom: 1 x DN 100; 5 x DN 50; 2 x DN 25

10500 liter pressure tank, Aisi 304

• Manufacturer: Bolz

max. allowable working temperature: 20 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents,various documents remarks: 1 stainless steel sheet inside in the lower bottom (see...

1100 liter pressure tank, Aisi 304

• Manufacturer: Waldner

max. allowable working temperature: 50 °C EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

3500 liter heat-/coolable tank, Aisi 316

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil remarks: Feet originally stood on load cells, these are no longer available (see pictures); according to the type pla...

750 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the...

850 liter insulated tank, Aisi 304

remarks: Smaller dents in the insulation jacket; 2 hand holes with a diameter of approx. 175 mm each and 1 elongated sheet metal cutout in the lid (see photos)

1235 liter pressure tank, Aisi 304

• Manufacturer: Waldner

max. allowable working temperature: 100 °C remarks: Pneumatic butterfly valve; welded pipeline inside the tank (see photos); cone height approx. 530 mm; minor differences in the design of the tanks possible

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...