Used Tanks & Kettles in Germany

16000 liter heatable storage tank, Aisi304

remarks: Full pipe coil inside the tank (lower cylinder area) available

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

750 liter heat-/coolable tank, Aisi 316

• Manufacturer: Manfred Roth

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 1.5 bar max. allowable working temperature (dj): 95 °C temperature control bottom (dj): double jacket remarks: Inner tank in "f...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

950 liter heat-/coolable tank, Aisi 304

• Manufacturer: Waldner

max. allowable working temperature: 80 °C max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Manhole diameter a...

16500 Liter tank with flat bottom, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawing; lower bottom with slope to the outlet with cup (for installation, an appropriate foundation would have to be built on si...

3600 liter pressure tank, Aisi 304

max. allowable working temperature: 20 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: 1 pipe inside the tank (see photos); manhole appr. 345 x 440 mm

900 liter oval tank, Aisi 316

Volume: 900 liter | Stand type: legs height adjustable | Quantity legs: 4 Piece | Total height: 1.330 mm | Total width: 760 mm | Total length: 1.850 mm | Technical equipment: butterfly valve, spray ball | Outlet...

2900 liter heatable tank, Aisi 316

notice: some residues of previous content, manhole cover is missing material temperatur control system: stainless steel

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...

3500 liter heat-/coolable tank, Aisi 316

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil remarks: Feet originally stood on load cells, these are no longer available (see pictures); according to the type pla...

750 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the...