Used Tanks & Kettles in Germany

130 liter pressure tank, AISI 316

• Manufacturer: Eckhardt + Hedderich

max. allowable working temperature: 200 °C remarks: Diameter of hand hole approx. 150 mm; dip tubes inside the tanks; some minor dents

6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

17200 liter mixing tank, Aisi 304, with ex-proof 27 kW blade stirrer

• Manufacturer: Hagemann

max. allowable working temperature: 100 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: outlets partly cut off; one tank (internal no. 7083-2) with 1 dent in th...

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...

11320 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards material temperatur control system: AISI 304 (...

Unused 8890 Liter heat-/coolable pressure tank, Aisi 904L

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control...

Unused 500 liter heat-/ coolable pressure tank, Aisi 904L

• Manufacturer: Kasag

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control...

Stainless steel tank 147.5 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on a concrete base with upper conical base and lower inwardly curved conical base. Propeller agitator in the cylinder at the bottom. Insulation around the cylinder, cover made of full...

Stainless steel tank 82.7 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with flat bottom and conical top. Agitator with stabilizing ring installed diagonally in the cylinder, 5.5 kW, 955 rpm. Connections: 1 manhole 340 x 440 mm in the cylinder, 1 x DN 80 ...

Aventics 3513000000 Series AR1 Compressed Air Tank 10L 11 BAR

• Manufacturer: Aventics

The goods originate from a company liquidation and were temporarily stored in paternosters. Storage marks may appear. R14B2_EK BOR 5KG

4000 liter horizontal storage tank with 2 mounted cross blade stirrers, Aisi 304

notice: some residues of previous content, manhole cover is missing remarks: bearer frame made of Fe; insulation jacket with dents and extensively nonexistent; manhole appr. 300 x 400 mm in one of the bottoms

100,000 liter double-walled steel heating oil tank system (S235JR)

remarks: Manhole diameter: approx. 600mm; including optical leak detector, tank fitting for heating oil, limit indicator & ladder with stand;

44070 liter upright pressure-resistant storage tank made of stainless steel 304

• Manufacturer: Ziemann Holvrieka

Technical documentation: drawing,German Technical Supervisory Association TÜV documents

8750 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

• Manufacturer: G + R W. Ortmann GmbH & Co. KG

remarks: 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not in...