Category

Country

  • 1999 Taylor 20 section x 8.5 12224

    $14,900 - Williamsport, PA, USA
    • Manufacturer: Taylor

    used taylor clamp carrier.20 section, 8.5' wide6 clamps per sectionclamps open 32" with 2-1/2" jawspneumatic rotationpneumatic tightnings/n f298, 1999

  • 1992 Taylor 20 section x 8.5 wide 11619

    $18,000 - Williamsport, PA, USA
    • Manufacturer: Taylor

    model-800165 8.5 wide x 20 section 6 clamps per section 3-1/2" jaws x 32" opening total clamps 120 hydraulic rotation and auto tighten loosen, two panel flatteners

  • Taylor-Hobson Talyrond 250

    No price - Washington, PA, USA
    • Manufacturer: Taylor

    includes table, motorised radial arm traverse length may be set for up to 1.97" (50.00 mm) of travel past the spindle axis

  • 1994 Taylor-Hobson Talysurf 120L

    No price - Washington, PA, USA
    • Manufacturer: Taylor

    serial: 469 | weight: 25.35 lbs 11.50 kg | gauge type: phase grating interferometer, 1 mn force nominal | resolution: 12.8 nm @ 10 mm range | machine width: 5.00 in 127.00 mm | condition_info: exc...

  • Taylor-Winfield 5kva transformer; 42-0.5-5-8-T1, 220 volt input, 1.33 to 5.12

    $595 - Salem, MA, USA
    • Manufacturer: Taylor

    taylor-winfield 5kva transformer; 42-0.5-5-8-t1, 220 volt input, 1.33 to 5.12 out wit taps. 68#

  • Taylor Clamp Carriers - Made in America to Your Spec! 10100N

    No price - Hughesville, PA, USA
    • Manufacturer: Taylor
    • Capacity: 8.5', 10.5', 12.5', 14.5', 16.5', or 20.5'

    swing-style, semi-automatic, automated, super automated, dual automated, and side-loading! pneumatic or hydraulic rotation, depending on size & application available with 6, 12, 16, 20, 30, 40, or ...

  • 7.5 KVA Taylor-Winfield BY4101-001 SPOT WELDER, MIYACHI UNITEK STA-100A CONTROL

    $4,950 - Harrison, NJ, USA Recently Added
    • Manufacturer: Taylor

    taylor winfield 7.5 kva resistance welding system primary voltage 230/460 / 50/60 hz. secondary voltage 5.97 high, 2.99 low bore 3" stroke 1-1/2" complete with: - taylor winfield welder model by410...

  • 100 KVA 36" Throat Taylor-Winfield M8CB-38-100-LCD SPOT WELDER, Seam Welder w/Intertron Program. Cntrl Mdl. MC301B

    $49,500 - Harrison, NJ, USA
    • Manufacturer: Taylor
    • Weight: 10,000 lbs.

    taylor winfield 180 kva tri-phase resistance seam welder, with late model controls manufacturer : taylor winfield type : seam, m8cb-38-100lcd, gear drive, circumferential. serial number : 91289 pri...

  • Taylor-Winfield PRESS/PROJECTION #16059C

    No price - Monclova, OH, USA
    • Manufacturer: Taylor

    model #:  press / projection serial #:  071212fp 100 kva maximum secondary volts 10.2 minimum secondary volts 5.1 120 v control voltage 33″ throat model 108-2 interlock industries control 300 weld ...

  • JLT 171B Roller Spreader 35320N

    No price - Hughesville, PA, USA Recently Added
    • Manufacturer: Taylor

    13" wide glue roll slip clutch for safety stainless steel container overnight glue storage long or short stock attaining the proper glue spread thickness is very important. too much or too little...