Used Machine Tools in Brandenburg, Germany

Kjellberg KJELGOUGE

• Manufacturer: Kjellberg

Kjellberg FineMarker

• Manufacturer: Kjellberg

Output current: 4 - 25 A | Duty cycle: 100 % | Weight: 30 kg | Dimensions (l x b x h): 710 x 400 x 440 mm | Marking gases: Argon or air | Marking speed: 1.5 - 12 m/min | Plasma torch: PB-M25 W (liquid-cooled)

Kjellberg HiFocus 280i neo

• Manufacturer: Kjellberg

Power source: HiFocus 280i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 280 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 70 mm | Piercing: up to 40 mm | Dimensions (l x ...

Kjellberg HiFocus 360i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 80 mm | Piercing: up to 50 mm | Dimensions (l x ...

Kjellberg HiFocus 600i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 10 - 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 160 mm

Kjellberg Q 1500

• Manufacturer: Kjellberg

Power source: Q 1500 / Q 1500 plus | Cutting current at 100% d.c.1: 20 - 150 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 40 mm60 mm30 mm | Cutting ra...

Kjellberg Q 4500

• Manufacturer: Kjellberg

Power source: Q 4500 | Cutting current at 100% d.c.1: 20 - 450 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 70 mm120 mm50 mm | Cutting ranges stainles...

Kjellberg KSI 1000

• Manufacturer: Kjellberg
• Amperage: 1,000 A

Power source: KSI 1000 | Mains voltage: 3/PE AC 50/60 Hz, 400 V ±10 % | Connected load at 100% duty cycle: 51,5 kVA | Fuse: 125 A (80 A or 100 A also possible) | Welding current range: 80 – 1000 A / 18 – 44 V DC...

Kjellberg FIDUR 10/60

• Manufacturer: Kjellberg

Fidur 10/60 is the electrode for highly wear-resistant surfacings on unalloyed and low-alloyed metals of higher strength, especially when heavily abrasion-loaded and exposed to moisture. This stick electrode is e...

Kjellberg FINOX 182

• Manufacturer: Kjellberg

The nickel-base electrode Finox 182 is suited for high-quality joints and platings on similar and dissimilar alloys at working temperatures from -196 °C up to 550 °C. The fully austenitic weld metal is chemically...

Kjellberg FINOX 4332 AC

• Manufacturer: Kjellberg

Finox 4332 AC is an electrode for joint welding of unalloyed and low-alloyed steels with high-alloyed steels, cast steel tpyes and for austenite-ferrite joints at working temperatures of up to 300 °C. It is suite...

Kjellberg FINOX 4370 B

• Manufacturer: Kjellberg

Basic coated stick electrode for joint and surface welding of dissimilar steels, of heat-treatable, armour and austenitic manganese steels with and to each other, for austenitic-ferritic joints at working tempera...

Kjellberg FINOX 4462 AC

• Manufacturer: Kjellberg

The electrode Finox 4462 AC is suited for joint welding on corrosion-resistant duplex steel. The austenitic weld metal has a ferrite content of approx. 40 to 50% and is especially resistant against pitting corros...

Kjellberg FINOX 4551 B

• Manufacturer: Kjellberg

The electrode Finox 4551 B is suited for joint welding on unstabilised and stabilised austenitic, chemically stable chromium-nickel steel at working temperatures of up to 400 °C as well as for corrosion-resistant...

Kjellberg FINOX 4015 AC

• Manufacturer: Kjellberg

Rutile-coated high-performance electrode for welding of stainless, heat-resistant and low-temperature steels and cast steel types, on ferritic steels of the same grade and similar heat-treatable steels / cast ste...