- Trusted Seller
BUEHLER ECOMET 5 TWO SPEED GRINDER-POLISHER 49-1785-160 W/AUTOMET 2 POWER HEAD
- Manufacturer: Buehler
- Model: Ecomet 2
“OLD STOCK, BOTTOM DOES POWER ON, NO WAY TO TEST” BUEHLER ECOMET 5 TWO SPEED GRINDER-POLISHER CAT NO: 49-1785-160 VOLTS: 100/115 HZ: 50/60 AMP: 15.0 1 PHASE AUTOMET 2 POWER HEAD CAT NO: 60-1950-160 VOLTS: 120 HZ:...
$4,000 USDCoffeyville, KS 
Atlas Film Maker Kit with 15 ton Press
- Manufacturer: Atlas
Specac film maker kit with 15 ton press is designed for making polymer films for evaluation in transmission with an FTIR. As pictured, this is a complete system that includes the dies (for various thicknesses), ...
$3,800 USDWhite Bear Lake, MN- Trusted Seller
TINIUS OLSEN S-1000-2A EXTENSOMETER TENSILE TESTER
- Manufacturer: Tinius-Olsen
“OLD STOCK” TINIUS OLSEN S-1000-2A EXTEMSOMETER TENSILE TESTER PAT. 2767376 A 250 B 500 C 1000 S. O. 154378 INSTRON CINCH 0530 DB25P MOD#: S-1000-2A GAGE LENGTH: 2" TRAVEL: +2%/-2% ID CODE: 0/24 SERIAL: SO154378 ...
$1,400 USDCoffeyville, KS - Trusted Seller
CSI RESIDUAL INDENTATION TESTER MODEL CSI-71
- Manufacturer: CUSTOM SCIENTIFIC INSTRUMENTS
“OLD STOCK, SHELF WEAR” WILSON/ ROCKWELL HARDNESS TESTER, B526T, W/ CABINET, 64" X 27" X 15" OAL DIM. CLARK HARDNESS TESTER C12A WITH CABINET CLARK HARDNESS TESTER C12A WITH CABINETSERIAL #50301COMES WITH:3" ANVI...
$1,500 USDCoffeyville, KS SPI Rockwell Model 15-817-0 Hardness Tester s/n 15436, Tooling & Manual
- Manufacturer: Rockwell
SPI Rockwell Model 15-817-0 Hardness Tester s/n 15436, Tooling & Manual To Purchase Equipment or Make An Inspection, Contact: The Auctioneer’s Office At 617-964-1886 or
Newton, MA- Auction
Newage Portable Hardness Tester with Standards in Wood Case
- Manufacturer: NewAge
Lot 400 Newage Portable Hardness Tester with Standards in Wood Case
Plymouth, MNVisit Auction Website - Trusted Seller
Boerner Type Sample Divider (16-3/4"H x 6-3/4"W)
- Manufacturer: Unknown
The divider is gravity operated. Sample is placed in the hopper and released by moving a slide gate located in the hopper throat. The product is evenly dispersed over a cone that has 22 pockets. The grain, after ...
Fargo, ND - Trusted Seller
Tensile Compression Tester Detroit NST-1 948 20K 100 kN Spot Weld Pull Tester Test, Measurement & Inspection
- Manufacturer: Detroit
“Excellent condition.” 20K 100 kN Detroit NST-1 948 Tensile Compression Tester Spot Weld Pull Tester with Delta Power B3874 motor Frame 2LA-565628 3/4 HP 115/230 Volts 10.0/5.0 Amps 60 Hz 1 Ph 1725 RPM New hydrau...
- Trusted Seller
BinMaster PRO-IIX Capacitance Level Control
- Manufacturer: BinMaster
This listing is for a NEW BinMaster PRO-IIX capacitance level control. A capacitance probe is a point level indicator, commonly used for high or low level detection in a bin, tank or silo. BinMaster capacitance p...
Fargo, ND 
Buehler Ecomet 3 49-1750-160 8 inch polisher with Automet2 power head. Lift Lock
- Manufacturer: Buehler
- Model: Ecomet 2
Buehler Ecomet 3 49-1750-160 8 inch polisher with Automet2 power head. Lift Lock chuck 50 to 500 rpm. 115 volts. Please note the specimen holder shown in the photos is not included.
Salem, MA
Buehler Abrasimet2 10" abrasive saw. 95-C1800-260 . left & right hand
- Manufacturer: Buehler
- Model: Abrasimet-2
Buehler Abrasimet2 10" abrasive saw. 95-C1800-260 . left & right hand vises, 4 HP 230/60/3 Without pump
Buehler Simplimet press with 1" mold and 115 volt heater.
- Manufacturer: Buehler
- Model: Simplimet
Buehler Simplimet press with 1" mold and 115 volt heater.
$1,925 USDSalem, MA
Buehler Minimet 1000 cross section polisher, 69-1000 120/240 universal voltage,
- Manufacturer: Buehler
- Model: Minimet
Buehler Minimet 1000 cross section polisher, 69-1000 120/240 universal voltage, with instruction manual
Salem, MA
Buehler IsoMet 5000 automatic precision saw 11-2780, 7" blade capacity 200-5000
- Manufacturer: Buehler
- Model: Isomet-5000
Buehler IsoMet 5000 automatic precision saw 11-2780, 7" blade capacity 200-5000 rpm, Motorized micrometer 1.25 HP motor. 83-264 VAC 50/60
Buehler IsoMet reconditioned low speed saw, 300 rpm 11-1180-160 complete with
- Manufacturer: Buehler
- Model: Isomet
Buehler IsoMet reconditioned low speed saw, 300 rpm 11-1180-160 complete with standard arm, weight set, choice of chuck below and 4" blade. 115 volts. Now shown with 11-1187
$2,400 USDSalem, MA
Struers Tegramin-25 Materials Testing
- Manufacturer: Struers
- Model: Tegramin-25
Good condition Struers Tegramin-25 Materials Testings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
