Used Processing in Michigan, USA

SULLAIR 50 HP AIR COMPRESSOR S-ENERGY 3700 NEW 2023 NEVER USED

• Manufacturer: Sullair

1-SULLAIR 50 HP AIR COMPRESSOR S-ENERGY 3700 NEW 2023 NEVER USED SERIAL NUMBER 2028705 DATE OF MFG. 09/28/2023 STK#105340 =================================== SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED...

ZETA GROUP ENGINEERING 30" X 137" LONG MOTORIZED PLASTIC TOP CONVERYORS

• Manufacturer: Zeta Group Engineering

1-USED ZETA GROUP ENGINEERING MOTORIZED FANUC ROBOT READY 30" WIDE X 137" LONG SERIAL NUMBER 4068-1 DATE OF MFG. 08/2023 STK#105338 4 UNITS AVAILABLE =================================== SPECIFICATIONS WHIL...

FANUC M410iC/185 PALLETIZING ROBOT WITH R-30iB 185 KG X 3143 MM REACH FOR SALE

• Manufacturer: Fanuc
• Model: M-410iC/185

1-USED FANUC M-410iC/185 4 AXIS PALLETIZING ROBOT WITH R-30iB CONTROLLER HOURS SHOWN ON METER 1,249.8 SERIAL NUMBER F197399 FANUC ROBOT MECHANICAL UNIT TYPE A05B-1044-B202 FANUC CONTROL TYPE A05B-2612-B022 D...

FANUC M-410iB/700 4 AXES PALLETIZING ROBOT DATA SHEET WITH FANUC R-30iB PLUS CONTROL

• Manufacturer: Fanuc
• Model: M-410iB/700

1-USED FANUC PALLETIZING ROBOT MODEL M410iB/700 WITH R30iB CONTROLLER SERIAL NUMBER F271914 DATE OF MFG. 06/2021 FANUC MECHANICAL UNIT PART NUMBER A05B-1042-B201 FANUC R-30iB PLUS CONTROL PART NUMBER A05B-261...

FANUC M410iB/160 PALLETIZING ROBOT WITH R30iA CONTROLLER

• Manufacturer: Fanuc
• Model: M-410

1-FANUC M410iB/160 4 AXIS PALLETIZING ROBOT WITH R30iA CONTROLLER SERIAL NUMBER F98037 DATE OF MFG. 08/2009 STK#104804 ======================================== SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEM...

Cast Link Belt Lines (3 Available) #C416

• Manufacturer: Correa

Item # C416 Cast Link Belt Lines (3 Available) This is a complete heat treat department of which the main feature are 3 Cast Link belt lines, each capable of 6,000 pounds/hour. Also included are 3 endothermic gen...

AEC WHITLOCK DRYER WD-100CHE-Q USED

• Manufacturer: AEC
• Model: WD-100CHE-Q

4 HP Process Blower 1/4 HP Regeneration Blower 4.2 Process Blower F.L. Amps .5 Regeneration Blower F.L. Amps 3.5 kW Regeneration Heater 460 Volt 3 Phase 60 Hz 11.29 F.L. Amps Buyers are welcome to inspec...

THERMAL CARE AQ0W1004 10 Ton Water Cooled Chiller Used

• Manufacturer: Thermal Care

Accuchiller 10 Ton Water Cooled 10 HP Compressor 5.0 HP Process Pump R-438A Refrigerant @ 12 Lbs 30°/70°F Min/Max Temp Heat Transfer Fluid: 30% Glycol 460 Volt 3 Phase 60 Hz 24 F.L. Amps Tested Good ...

CINCINNATI MILACRON Dryer w/ 3 Hoppers & Loaders DD-1700 HOP USED

• Manufacturer: Cincinnati

Una-Dyn Dehumidifying Drying System DHD-25 Approx. 850-900 Lbs. per. Hour **Please look at all pictures to see what is included** Pre-Cooler Included Heater Hose not Included Need Desiccant Replaced 7.5 HP...

ECM TECHNOLOGIES VACUM CARBURIZATION FURNACE NEW 2013

• Manufacturer: ECM TECHNOLIGIES

1-USED ECM TECHNOLOGIES VACUM CARBURIZING FURNACE SERIAL NUMBER 3100-500 DATE OF MFG. 2013 STK#104132 =========================== NEW COST WAS SEVERAL MILLION SUPER SPECIFICATIONS WHILE OBTAINED FROM SOURCE...

2018 MGL 7436

• Manufacturer: MGL

2018 MGL 7436 Convayer, Only 705 Hours, Excellent condition, No issues, Ready for work

Powerscreen

• Manufacturer: Powerscreen

2 Powerscreen conveyers. Approx 2005, 530 Hours, Good Shape, Good belt, 4 Cylinder Cummins engine, Runs and operates good - Videos available 2nd - Approx 2004, 860 Hours, Has scale, Needs belt but still operable ...

Finlay 36X80

• Manufacturer: Terex - Finlay

Finlay 36X80 Conveyor, Hydraulic conveyor, Can be converted to electric, Good shape, Belt will be installed prior to sale, Runs and operates great, Work ready

Used Cherry Burrell 304 Stainless Steel Mix Tanks

• Manufacturer: Cherry Burrell

Used Cherry Burrell 304 Stainless Steel Mix Tanks, 136" Diameter x 270 Inches Tall, #4 Polish, Dish Top, Dish Bottom, Side Manhole, 3″ Center Outlet at Bottom, 10 Horsepower Off Center Top Agitator with 4 Bladed ...

Vac Aero 12” H × 15” W × 24” D #VF473

Item # VF473 Vac Aero 12” H × 15” W × 24” D 10 to the minus 5/6 vacuum levels All-metal hot zone, existing hot zone in good condition *Also includes new all-metal replacement hot zone* Honeywell controls Diffusio...