Used Processing in New York, USA

New NEC 20 cu. ft. 304 Stainless Steel V Blenders with inensifier bar

• Manufacturer: Shaanxi - Shacman

New NEC 20 cu. ft. 304 Stainless Steel V Blenders with inensifier bar - Capacity: 20 cu. ft. - Motor: 5 HP, 3 phase, 60 cycles 220/440 volts20 cu. ft. - RPM: 9 - Discharge Diameter: 6" - Working Dimensions: 91" (...

LENO Storage Mixing Stainless Tank 100 L Liter

• Manufacturer: LENO TANK

A mixing tank is widely used in paint, medicine, building materials, chemical, pigment, resin, food, scientific research and other industries. As well as being made of carbon steel, stainless steel, and other mat...

2016 Ferromatik Milacron 450 Ton K-TEC 450 / 2F Two shot Injection Molding machine

• Manufacturer: K-Tec

(2-shot / Single shot) 2016 450 Ton Ferromatik Milacron K-TEC 450 / 2F with Turning System and Ad Val tech Foboha robot: Made in Germany Shot size: 61.2 Oz / 14.9 Oz Screw size: 80mm/50mm Tie bar spacing: 39....

78.74" x 236.22" 15.75" Cast Iron T-Slotted Floor Plates (2-Available)

Features: T-Slotted Matched Set Cast Iron Equipped With: T-Slotted Cast Iron Construction NOTE:

60" x 180" x 9.8" Cast Iron T-Slotted Floor Plate, NEW

• Manufacturer: NEW

Features: Brand New to Order Cast Iron Construction NOTE: Photos Representative of Completed Plate NOTE: Plate can be built to specification DELIVERY: 5-6 Months from date of confirmed order

78.74" x 236.22" 15.75" Cast Iron T-Slotted Floor Plates (6-Available)

Features: T-Slotted Matched Set Cast Iron Equipped With: T-Slotted Cast Iron Construction NOTE:

84" x 168" Giddings & Lewis Cast Iron Angle Plate

• Manufacturer: Giddings & Lewis

Qty: 1 | Cast/fabricated: Cast Iron | Height: 84" | Width, face: 168" | Front to back: 64" | Work area: 84" x 168" | # of t-slots: 7 | T-slot center distance: 11.5" | Overall dimensions: 64.87"D x 168"W x 103.75...

2024 Goff 3BB Tumble Type Shot Blast Machine

• Manufacturer: Goff
• Model: 3BB

Equipped With: Power Pneumatic Door (Factory Upgrade) Low Profile Design Low Noise Level Continuous Molded Rubber Mill Belt Safety Interlocks Automatic Timer Controls Abrasive Recycling System Goff 816 Cartride D...

2008 BeaverMatic Pusher Furnace with Two Pushers with Loaders

• Manufacturer: Beavermatic Inc

Equipped With: Electric Control Enclosure Atmosphere Eng. Atmosphere Control Panel Pusher System Charge Vestibule Heat Zone with Electrical Heating Elements Soak Zone Fast Cool Zone Discharge Vestibule Various Co...

2013 Atlas Copco GA75P FF Air Compressor

• Manufacturer: Atlas

P.s.i.: 128 PSI | C.f.m.: 459.6 | Horsepower: 100 HP | Cfm: 459.6 | Maximum working pressure: 128 PSI | Motor size: 100 HP | Voltage: 460 Volts | Weight: 3,380 Lbs.

T-Slotted Riser Tables 42" x 24" x 127.5" Cast Iron

• Manufacturer: Giddings & Lewis

Equipped With: Cast Iron Construction Hold Down Locations on 3-Sides NOTE:

Floor Plate, T-Slotted 60" x 218.75" x 10" Cast Iron

• Manufacturer: Mfr. N/A

Equipped With: T-Slotted Leveling Bolts NOTE: Inspect In Our Philadelphia PA Warehouse

Trinco Master Model 60X48SL/Deluxe

• Manufacturer: Trinco

The Trinco™ Master Model 60x48SL Deluxe Blast Cabinet delivers heavy-duty performance with rugged 14-gauge steel construction, bright LED lighting, and a spacious 60" x 48" work area. Equipped with a 600 CFM abra...

15 Liter Sejong High Shear Granulator, Model SM-15

• Manufacturer: Sejong

15 Liter Sejong High Shear Granulator, Model SM-15 Used 15 liter Sejong high shear mixer, model SM-15, stainless steel construction, 220 volt, key international serial# JI-5188, Sejong serial# SM-11103, built 2011.

Rebuilt Jones model CMV5 vertical cartoner

• Manufacturer: Jones

Rebuilt Jones model CMV5 vertical cartoner - Extended loading area - Probilt Series 20 hot melt unit - On casters - 3 phase, 60 cycles, 220 volts - Serial # S-3656 - Carton length: 1" - 4-1/4" - Carton width: 3/4...