Used Processing

105" x 5" Teflon Dip Pipe

• Manufacturer: federal equipment

105" x 5" Teflon Dip Pipe Used 105" Teflon dip pipe, 5" outside diameter x 105" long wet length, 2" inside pipe diameter, 111.5" overall length, 6" flange, 2" top port.

Frewitt Conical Sieve Mill, Model FreDrive Coniwitt-150

• Manufacturer: Frewitt

Frewitt Conical Sieve Mill, Model FreDrive Coniwitt-150 Used Frewitt Conical Sieve Mill, model FreDrive, with Coniwitt-150 sieve attachment, stainless steel construction, Siemens controls, wtih motor vfd and Sima...

Feed Rate Controls

Feed Rate Controls Feed Rate controls with (2) Micro Motion flow meters

Portable Stair Case

• Manufacturer: Federal Equipment

Portable Stair Case Portable Stair Case

Stainless Steel Stand

• Manufacturer: Federal Equipment

Stainless Steel Stand Used stainless steel stand

Merrick Gravametric Feeder, Model 496-30SP

• Manufacturer: Merrick

Merrick Gravametric Feeder, Model 496-30SP Used Merrick gravametric belt feeder, model 496-30SP, approximately 36" diameter x 81" housing, on stand, serial# 17025.

22" Russell Sieve, S/S, MODEL 17300

• Manufacturer: Russell

22" Russell Sieve, S/S, MODEL 17300 Used 22" Russel Sieve, model 17300, stainless steel construction, approximately 22" diameter screen on stainless steel base, serial# A3755, built 2001.

Russell Compact Airlock Sieve, Model AC600

• Manufacturer: Russell

Russell Compact Airlock Sieve, Model AC600 Used Russell Compact Airlock Sieve, model AC600, 20" diameter screen, .32 kw in/.23 kw out, 230/460 volt vibro motor, Russell airlock clamping system with compact airloc...

Fluid Energy Jet Mill, model ALJET, S/S

• Manufacturer: Fluid Energy

Fluid Energy Jet Mill, model ALJET, S/S Fluid Energy Jet Mill, model ALJET, with computer, key board, assorted stainless components, regulator valve, filters, serial# S12499E.

Hosokawa Micron Atomizer Mill, Model 5 MA, S/S, 5 HP

• Manufacturer: Hosokawa

Hosokawa Micron Atomizer Mill, Model 5 MA, S/S, 5 HP Used Hosokawa Micron Atomizer mill, model 5 MA, stainless steel construction, 5 hp, 230/460 volt main drive, 14000 rpm rotor speed, screw feeder with hopper dr...

Mazzoni Bar Press, Type STUR6

• Manufacturer: Mazzoni

Mazzoni Bar Press, Type STUR6 Used Mazzoni bar press, type STUR6, serial# 24, built 1993.

Mazzoni Dual Lane Bar Press, Type STU-F/Quarter

• Manufacturer: Mazzoni

Mazzoni Dual Lane Bar Press, Type STU-F/Quarter Used Mazzoni dual lane bar press, type STU-F/Quarter, serial# 142, built 1983.

2021 NS Maquinas RC 300

• Manufacturer: NS Maquinas

Machine type: Process Equipment | Machine location: Idaho | Stock #: 164612 | -grinding belt: 100mm x 3030mm | – polishing wheel diameter: 250mm-350mm | -polishing wheel hole: 75mm | -polishing wheel thickness: ...

1998 John Deere 770

• Manufacturer: John Deere
• Model: 770

Machine type: Process Equipment | Machine location: Colorado | Stock #: 004920 | – length: 2.78 m // 9.1 ft | – overall width: 7.6 m // 24.9 ft | – height: 2.4 m // 7.9 ft | – operating width: 7.5 m // 24.6 ft |...

Surplus 21,000 CFM @ 30" SP New York Blower Fan 304 AF-Forty AF-40 Centrifugal

• Manufacturer: New York Blower

ITEM #: 21251 Surplus 21,000 CFM @ 30" SP New York Blower Fan 304 AF-Forty AF-40 Centrifugal SHOP number X08246 100. 200HP direct drive motor, 3565 RPM, 460 Volt, 444TS frame. Backward Inclined - High Pressure ...