Used Sheet Metal Processing in Germany

Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany
Trusted Seller
Weingarten UZH 80
- Manufacturer: Weingarten
This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...
Leipzig, Germany
Trusted Seller
1991 SCHÄFER SRMVHY
- Manufacturer: SCHÄFER
free loaded on truck sheet width 3000 mm plate thickness 16 mm pre-bending / weight of the machine ca. 15 t dimensions of the machine ca. m
Eilenburg, Germany
Trusted Seller
1994 LANG EL-HY168F CNC
- Manufacturer: Lang
free loaded on truck tube diameter 168,3 x 11 mm tube 6000 mm bending radius max. 700 mm Control Siemens 840 D bending radius min. 80 mm bending angle max. +/- 190 ° connected load 400 V / 50 HZ /85A Dimensions (...
Eilenburg, Germany
1999 Heitling GmbH & Co. Today Profile systems HEI - TECHMAT - II
- Manufacturer: Heitling GmbH & Co. Heute Profil systems
width approx. 7,500 mm depth 5,000 mm tower + 5,500 mm with extended cassette height approx. 7,500 mm
Frankfurt, Germany
Trusted Seller
1995 Transfluid DB 628
- Manufacturer: Transfluid
ex Works tube diameter 4-28 mm wall strength / mm bending radius min. / mm total power requirement 1,5 kW weight of the machine ca. t dimensions of the machine ca. m
Eilenburg, Germany
Trusted Seller
1996 TRANSFLUID DB 628
- Manufacturer: Transfluid
ex works tube diameter 4-28 mm wall strength / mm bending radius min. 1,5 x D - 2,0 x D mm control Siemens LOGO delivery rate 4,5 l/min bending angle max. +/- 190 ° nominal pressure 250 bar operating pressure 309...
Eilenburg, Germany
Trusted Seller
1986 VEB ELEKTROTECH.GERAETE 4 F - 6150
- Manufacturer: VEB ELEKTROTECH.GERAETE
- Power requirement: 1.5 kW
Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...
Leipzig, Germany
Trusted Seller
EOC nicht bekannt
- Manufacturer: EOC
- Power requirement: 0.55 kW
HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...
Leipzig, Germany
Trusted Seller
1970 straightening machine DDR BETRIEB nicht bekannt
- Manufacturer: DDR BETRIEB
- Power requirement: 1.2 kW
straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.
Leipzig, Germany
Trusted Seller
2001 TRUMPF-PULZER MR65R
- Manufacturer: Trumpf
- Power requirement: 34.4 kW
It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrou...
Leipzig, Germany
2003 I.MA.L CESO1A Speed 64
- Manufacturer: Imal
Press safety inspection according to BGR 500 according to the test report. Next inspection in January 2026.
Frankfurt, Germany
2014 sybrandy PF 4 L Spec
- Manufacturer: sybrandy
Designation of the plant: Extraction unit + classifier | Kw: 3KW | Capacity: 3.400m3/h | Cartridge: SYB325-1200
Frankfurt, Germany
Trusted Seller
2011 PAUL ERNST Neptune EB
- Manufacturer: Ernst
- Power requirement: 27 kW
Control type: CNC | Freight basis: from camp Jena | Working width: 1500 mm | Workpiece height: 100 mm | Total power requirement: 27 kW | Machine weight approx.: ca 7 t t | Space requirement approx.: 2,50 x1,80 x...
Zschepplin, Germany
Trusted Seller
2003 SERIOUS EM 5/ N 900
- Manufacturer: Ernst
Dokumentation: vorhanden Zusatzinformationen Entgradmaschine für Stanz-,Nippel- und Laserteile automatische Blechentgratungsmaschine im Nassschliffverfahren arbeitend Ausgerüstet mit von oben arbeitend,Walzenbrei...
Zschepplin, Germany
Schechtl KS 200 Sheet Metal Processing
- Manufacturer: Schechtl
- Model: KS 200
Good condition Schechtl KS 200 Sheet Metal Processing available between 1987 and 2012 years. Located in Germany and other countries. Click request price for more information.
Germany