Used Processing in British Columbia, Canada

1989 5000 bbl Storage Tank

• Manufacturer: GLM Tanks and Equipment

Package id: 12330521 | Service type: Sweet | Pasc condition rating: C | Skidded: No | Housed: No | Connection status: Connected | Capacity: 5000 bbl | Capacity(unit of measure): bbl | Capacity(use selected unit ...

1989 0.75 MMBTU/hr Sweet Line Heater

0.75MM BTU Line Heater Package id: 13044049 | Packager: Presson | Service type: Sweet | Pasc condition rating: C | Skidded: Yes | Housed: Yes | Connection status: Connected | Units available: 1 | Heater type (ind...

2005 500 USG Double Wall Sales Tank

• Manufacturer: De-In Industries

500 gallons TANK AST DW WATER C-020-A Package id: 12227870 | Service type: Sweet | Pasc condition rating: B | Connection status: Connected | Capacity: 500 USG | Capacity(unit of measure): Gallon | Capacity(use se...

2009 1.5 MMBTU/hr Sour Line Heater

Packager: RJU | Service type: Sour | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Heater type (indirect): Line Heater | Coil diameter: 3" | Coil diameter(unit of measure...

2009 460VAC MCC

• Manufacturer: PLATINUM ENERGY SERVICES

Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Voltage ac: 460VAC | Building heated: Yes | Mcc title: 460VAC

STEP FEEDER

- Double acting step feeder - Six (6) steps approximately 10 feet long - No end walls - Electrically driven (drive not included) - Disassembled

36" x 48" Falcon Rotary Hog

• Manufacturer: Falcon RME

- Built in 1992 by Clarkes - Drop feed - 36" x 48" Rotary Hog c/w fixed hammers - Two (2) 8V-8 groove sheaves on rotor - No motors included (originally driven by two (2) 250 HP motors) - Cylinder operated hinged ...

20' x 60' Roof Top Pull Chains (2 only)

• Manufacturer: Canadian Mill Equipment

- Five (5) runs of roof top chain c/w rollers on side - Approximately 50' long - Electric motor/reducer drive unit - Still installed

15' Double Screw Conveyor

- 15' x 36" wide - Dodge gear box - Motor removed

8" x 35' Screw Conveyor

- No drive

12" x 16' Belt Conveyor

- Fabricated steel trough 13" wide x 9" deep - Belt - Head and tail pulley - 5 HP electric drive

30" Troughing Conveyors - Bridge Type

- Approximately 7' wide x 7' high c/w catwalks - One (1) section 96' long - One (1) section 126' long - 30" wide troughing rolls (approx. 3'-9" c/c) - No drives - No head and tail pulleys

36" Conveyor

- Truss type - Covered with catwalk - c/w two (2) sets of drives & belt - 40'-0" sections - 500" feet available

36" x 45' Troughing Roll Conveyor

- Channel frame construction - Approx. 45' long (two sections) - 25 HP drive assembly (no motor) c/w head pulley - Tail pulley - Belt

36" x 29' Troughing Roll Conveyor

- Channel frame construction - Approx. 29' long - 15 HP drive assembly c/w head pulley - Tail pulley (loose) - Belt