Used pulse function generator

Tektronix PFG5105

• Manufacturer: Tektronix
• Model: PFG5105

This Generator performes using a Tektronix PFG5105 programmable pulse/function generator with a Trek 20/20 amplifier (20KV). To protect the amplifier from current overload, an 18M resistor was added in series to ...

Tektronix DTGM20

• Manufacturer: Tektronix
• Model: DTGM20
• Frequency range: 0.2 GHz

This is an Output Module that can be used with the DTG5000 mainframe. These modules can be used in any combination and in any slot. They are functional differences between slot A though slot D and slot E though s...

Tektronix RG501

• Manufacturer: Tektronix
• Model: RG501

Ramp Generator Module The Tektronix RG501 is a Ramp Generator Module. This module is used in the TM500-Series Power Units. It is suited to sweep the VCF or VCO inputs of most function generators. The RG501 has ...

Rigol DG5252 Pro Function/Arbitrary Waveform Generator

• Manufacturer: Rigol
• Model: DG5252

Features Dual-channel output, isolated from the ground Max. sample rate: 2.5 GSa/s Max. output frequency: 500 MHz 16-bit vertical resolution Square: 170 MHz max. frequency, 0.8 ns min. rise time Pulse: 120 MHz ma...

Rigol DG5352 Pro Function/Arbitrary Waveform Generator

• Manufacturer: Rigol
• Model: DG5352

Features Dual-channel output, isolated from the ground Max. sample rate: 2.5 GSa/s Max. output frequency: 500 MHz 16-bit vertical resolution Square: 170 MHz max. frequency, 0.8 ns min. rise time Pulse: 120 MHz ma...

Siglent SDG2042X Function/Arbitrary Waveform Generator

Features Dual-channel, 20 Vpp maximum output amplitude, high fidelity output with 80 dB dynamic range High-performance sampling system with 1.2 GS/s sampling rate and 16-bit vertical resolution Innovative TrueArb...

SANSEI MANUAL PULSE GENERATOR 0GM-01-2 504014-166 OGM LOT OF 2 PIECES

• Manufacturer: Fanuc

THIS PART CAME FROM A FULLY FUNCTIONAL SNK-SUT70 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.

Rigol DG5502 Pro Function/Arbitrary Waveform Generator

• Manufacturer: Rigol

Features Dual-channel output, isolated from the ground Max. sample rate: 2.5 GSa/s Max. output frequency: 500 MHz 16-bit vertical resolution Square: 170 MHz max. frequency, 0.8 ns min. rise time Pulse: 120 MHz ma...

SANSEI MANUAL PULSE GENERATOR 0GM-01-2 504014-166 OGM LOT OF 2 PIECES

• Manufacturer: Fanuc

THIS PART CAME FROM A FULLY FUNCTIONAL SNK-SUT70 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.

Tektronix FG5010

• Manufacturer: Tektronix
• Model: FG5010

The Tektronix FG5010 is a Function Generator that is designed to operate in a TM 5000-Series Power Module. This unit covers the frequency range from 0.002Hz to 20MHz and offers an output to 20 Vp-p from 50-ohms. ...

Tektronix FG504

• Manufacturer: Tektronix
• Model: FG504

This Generator provides low distortion sine, square, triangle, ramp, and pulse wave forms over the frequencies from 0.001Hz to 40MHz in ten decades. This unit may be swept between the START and STOP FREQ. dial se...

Siglent SDG1062X Plus Function/Arbitrary Waveform Generator

Features Dual-channel, maximum output frequency 60 MHz, maximum output amplitude 20 Vpp 1 GSa/s digital-to-analog converter sampling rate, 16-bit vertical resolution Innovative TrueArb technology, based on a poin...

Fluke 39A

• Manufacturer: Fluke
• Model: 39A

Arbitrary, Pulse, DC Offset Frequency range: 100.0uHz to 16.0MHz | Freq. resolution: 0 | Waveform outputs: Sine, Square, Triangle, Ramp, | Modulation: AM, Sweep, Burst, Trigger | Number of channels: 1 | Resolutio...

Tektronix AFG3251

• Manufacturer: Tektronix
• Model: AFG3251

25 MHz, 100 MHz or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms 5.6" Display for Full Confidence in Settings and Waveform Shape Multi-language and Intuitive Operation Saves Set-...

Tektronix FG501

• Manufacturer: Tektronix
• Model: FG501

The Tektronix FG501 is a Function Generator. The RG501 is intended to be used in any of the TM-Series power supplies, like the TM503. The frequency is adjusted by a decade switch for ranges and dial for X1 to X1...