Test, Lab, Medical equipment » Test Generators

Building Filters

864

Used combines

  • Agilent/Keysight 8770A

    Agilent/Keysight 8770A

    • Manufacturer: Agilent - Keysight
    • Model: 8770A

    The HP 8770A Arbitrary Waveform Synthesizer is a dc to 50 MHz signal generator. It has the capability of reproducing arbitrary waveforms; the waveform is reproduced using its frequency components up to 50 MHz. Wa...

    $1,995 USD
    Farmingdale, NJ
  • Agilent/Keysight 3326A

    Agilent/Keysight 3326A

    • Manufacturer: Agilent - Keysight
    • Model: 3326A

    The 3326A Two-Channel Synthesizer combines two independent synthesizers, flexible modulation and control circuitry into a single, powerful package. Frequency range is DC to 13MHz. Output amplitude is adjustable f...

    $897 USD
    Farmingdale, NJ
  • Agilent/Keysight 8165A

    Agilent/Keysight 8165A

    • Manufacturer: Agilent - Keysight
    • Model: 8165A

    The 8165A Programmable Signal Source can meet your many signal source requirements. Versatility is provided in programmable sine, triangle, pulse, ramp and square waveform outputs. Frequency range from 0.0001Hz t...

    $2,295 USD
    Farmingdale, NJ
  • Agilent/Keysight 8642A

    Agilent/Keysight 8642A

    • Manufacturer: Agilent - Keysight
    • Model: 8642A

    The Agilent 8642A synthesized signal generator is a high-performance, programmable signal generator for demanding out-of-channel RF receiver measurements and other stringent RF applications. It covers the frequen...

    $1,997 USD
    Farmingdale, NJ
  • NoiseCom NC6110

    NoiseCom NC6110

    • Manufacturer: Noise/COM
    • Model: NC6110

    Noise Generator, 100Hz to 1.5GHz 2: 110 dB attenuator in 1 dB steps (two attenuators | 4: Combiner for input signal | 6: 19 in. rack mountable unit, 17 in. wide by 3.5 in. high by 13 in. deep | 8: BNC female outp...

    $2,993 USD
    Farmingdale, NJ
  • Agilent/Keysight 8780A

    Agilent/Keysight 8780A

    • Manufacturer: Agilent - Keysight
    • Model: 8780A

    The Agilent 8780A vector signal generator is a synthesized IF source with exceptional modulation for modern receiver and component testing. It is capable of modulation bandwidths almost 100 times wider than previ...

    $2,997 USD
    Farmingdale, NJ
  • Agilent/Keysight 8160A

    Agilent/Keysight 8160A

    • Manufacturer: Agilent - Keysight
    • Model: 8160A

    The HP 8160A is a fully programmable pulse generator designed for high performance applications on the bench and in automatic test systems. Operation is made easy because the pulse parameters are controlled indep...

    $595 USD
    Farmingdale, NJ
  • NoiseCom NC6107

    NoiseCom NC6107

    • Manufacturer: Noise/COM
    • Model: NC6107

    Noise Generator, 100Hz to 100MHz 7: N (f) Output Connector | 9: 75 Ohm Output Impedance (-6dB loss) | 1: 100dB Attenuator in 10dB steps. | 3: 230VAC Input Power | 6: 19in Rack Moutable Unit | 8: BNC (f) Output Co...

    $1,495 USD
    Farmingdale, NJ
  • Tektronix DF-A0047^

    Tektronix DF-A0047^

    • Manufacturer: Tektronix
    • Model: DF-A0047

    The Tektronix DF-A0047 20 MHz to 8.5 GHz Alaris Handheld Direction Finding Smart Antenna with Compass and Preamp for USB Spectrum Analyzers is for use in interference hunting applications with USB spectrum analyz...

    $8,537 USD

    Get financing

    Est. $168/mo

    Farmingdale, NJ
  • NoiseCom UFX7112

    NoiseCom UFX7112

    • Manufacturer: Noise/COM
    • Model: UFX7112

    Noise Generator, 1 MHz to 2 GHz Cal: Calibration Available | As-is: Unit Sold AS-IS | 1: Type N(f) Output Connector | 10: 230 vac 50 Hz Line Power | 11: RS-232 in addition to standard IEEE-488 interface | 13: 0-1...

    $4,148 USD
    Farmingdale, NJ
  • NoiseCom UFX7110

    NoiseCom UFX7110

    • Manufacturer: Noise/COM
    • Model: UFX7110

    Programmable Noise Generator, 100Hz-1.5GHz 1: Type N(f) Output Connector | 11: Adds RS232, R422, & R423 interfaces in addition to IEEE-488 | 10: 230 vac 50 Hz Line Power | 14: Special Frequency Range (consult Fac...

    $2,995 USD
    Farmingdale, NJ
  • Agilent/Keysight 11667A

    Agilent/Keysight 11667A

    • Manufacturer: Agilent - Keysight
    • Model: 11667A

    The Agilent 11667A power splitter is recommended when making wideband ratio measurements using an Agilent 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the a...

    $1,250 USD
    Farmingdale, NJ
  • Agilent/Keysight 11850D

    Agilent/Keysight 11850D

    • Manufacturer: Agilent - Keysight
    • Model: 11850D
    • Frequency range: 2 GHz

    The Agilent 11850D is a 75 ohm three-way power splitter that is recommended for use with the Agilent 8753 network analyzer. RF input connectors are 50 ohm, type-N female. All other connectors are 75 ohm, type-N f...

    Farmingdale, NJ
  • Agilent/Keysight 0955-0827

    Agilent/Keysight 0955-0827

    • Manufacturer: Agilent - Keysight

    The Model 0955-0827 Resistive Power Splitter is used to divides one signal into two signals. This is accessory kit for the models E8300A and E6554A.

    Farmingdale, NJ
  • Agilent/Keysight 11850A

    Agilent/Keysight 11850A

    • Manufacturer: Agilent - Keysight
    • Model: 11850A

    The Agilent 11850A is a 50 Ohm, Three-Way Power Splitter offering excellent tracking and phase match between its output ports. Its operating range is from DC to 1.3 GHz. It is an essential accessory for use with ...

    $604 USD
    Farmingdale, NJ
12345

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.