Building Filters
- Trusted Seller
Tetra Pak Multitube
- Manufacturer: Tetra Pak
Tube heat exchanger, straight design multitube, length: 6mtr, 7 inner tubes with diameter 22 mm, outer tube coagurated. Outer tube diameter 113 mm. Capacity: 0,41 m2x7=2,9m2. With connections product in/out DN 80...
Lopik, Netherlands - Trusted Seller
Tetra Pak Spiraflow
- Manufacturer: Tetra Pak
- Model: SPIRAFLOW
Double jacketed and insulated tubular tube heat exchanger. Set of 5 tubes. Multitube, scheme: 2 x 2 in parallel and 1 in serial. Effective length 6mtr. 4 Tubes outer diameter 105 mm and 1 outer diameter 115 mm. 4...
Lopik, Netherlands - Trusted Seller
Lopik, Netherlands - Trusted Seller
Tetra Pak WD818
- Manufacturer: Tetra Pak
A stack of used discs for a WD 818 machine. In total 173 pieces. Weight: 230 kg.
Lopik, Netherlands - Trusted Seller
1994 Tetra Pak PV-HLSD
- Manufacturer: Tetra Pak
- Model: PV-HLSD
Pressure -1 to 3 bar in tank. Insulated. Max temperature 95 degrees.
Lopik, Netherlands - Trusted Seller
1992 Tetra Pak VTIS C-4
- Manufacturer: Tetra Pak
- Model: VTIS C4
Flash barrel with condenser for UHT unit with direct heating system. In the flash vessel the product is cooled by vacuum from sterilization temperature of 135/150 ° C to approx. 80 ° C by vacuum. Because rapid co...
Lopik, Netherlands - Trusted Seller
2008 Tetra Pak MS10-SR
- Manufacturer: Tetra Pak
- Model: MS10SR
Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.
Lopik, Netherlands - Trusted Seller
2015 Tetra Pak Hot water set / MT-108
- Manufacturer: Tetra Pak
Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.
Lopik, Netherlands - Trusted Seller
2009 Tetra Pak Hot water set / MT-108
- Manufacturer: Tetra Pak
Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.
Lopik, Netherlands - Trusted Seller
2011 Tetra Pak Hoyer Addus FF4000 F1
- Manufacturer: Tetra Pak
- Model: Hoyer FF4000
Ingredient doser / Fruit feeder, To add a dry ingredient to a liquid like icecream or butter (this machine). Main components of the unit: 1.) Dosing unit, 2.) Lamella transfer pump, 3.) Horizontal Mixer (used on ...
Lopik, Netherlands - Trusted Seller
1995 Tetra Pak Spiraflow TTF-38s/16c-3-1
- Manufacturer: Tetra Pak
- Model: TTF38
Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...
Lopik, Netherlands - Trusted Seller
1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1
- Manufacturer: Tetra Pak
- Model: TTF2
Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...
Lopik, Netherlands - Trusted Seller
Miteco powder disolving table
- Manufacturer: Tetra Pak
Powder disolving table. Brand: Miteco. Miteco has been taken over by Tetra Pak and Tetra Pak is now selling this powder dissolving tables as Mixer RJCI in combination with an additional pump and tank (excluded). ...
Lopik, Netherlands 2014 TETRA PAK Alfast standardisation system
- Manufacturer: Tetra Pak
- Model: Alfast
Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity 25000 l/u. Equipped with 2 density meters, 4 electro-magnetic flowmeters and 3 flow control valve...
Udenhout, Netherlands- Trusted Seller
1996 Tetra Pak Tetra Alex 30
- Manufacturer: Tetra Pak
- Model: Alex 30
Aseptic high pressure homogenizer. 2 stages with hydraulic pressure control. Cone valves. 3 Pistons, piston diameter: 63 mm and stroke: 135 mm. Stainless steel cladded. Connections: 2x 2,5" SMS. Current motor pow...
Lopik, Netherlands 
Tetra Pak TTF2 Heat Exchanger
- Manufacturer: Tetra Pak
- Model: TTF2
Good condition Tetra Pak TTF2 Heat Exchangers manufactured in 1996. Located in Netherlands and other countries. Click request price for more information.
Netherlands